The MW430 lyre is equipped with 4 powerful 30W RGBW LEDs for a rich and dense light output, allowing Wash effects through a palette of vibrant colors. Thanks to its many operating modes and its fast and silent motorization allowing a 540° pan angle and 200° tilt angle, this lyre is capable of covering large spaces with a captivating dynamic, making it a perfect projector for DJs, bars, clubs, or bands. Compact and lightweight at 3 kg, the MW430 is equipped with a base for safe upside-down installations.
PX1
PX1 is a multifunctional foldable music stand. Thanks to its particular design, the product is stable in any position of its use. The board can be removed and folded. This part is made of shock-resistant but flexible ABS, so that to avoid damages due to accidental falls. PX1 Music Stand is equipped with a storage compartment and two retractable holders to hang headphone and violin, cello or double bass bow. Useful also for any other proper use. In case of large music sheets, board extensions named PX1A are available as separate and optional accessories. The extensions are to be connected on the board lateral rails.
Inc. Bag
Madrigal Guitars in collaboration with Alfredo Gonzalez Luthier offers to the professional guitarists these 100% Handmade classical guitars concert models .
Each guitar is made separately with an exhaustive selection of exclusive and exotics woods and highly musical especiality.
The playing guitarist will achive Powerful attack, unique lyrical and sensitive timbre, with a wide spectrum sound between piano and forte that the professional musician will appreciate.
All the guitars are shellac finished.
AURORA - PROFESSIONAL
Back/Sides: Solid Madagascar Rosewood
Top Solid special Cedar
Fingerboard: Gabon ebony
Neck: Cedar Special
Bridge: Amazonas rosewood
Rosette: Wood mosaic
Bindings: cocobolo
Headplate: Madagascar
Tuners: Gottoh
Finish: High gloss
Scale: 650mm
NAMED AFTER DANISH GUITARIST KNUD MØLLER
T-Rex Møller 2 delivers the same classic overdrive that made it's predecessor one of T-Rex’s most sought-after pedals. Named after Danish guitarist Knud Møller, for whom the original pedal was designed, Møller 2 features a more durable “Bass Boost” toggle switch and easier-to-read control knob graphics. The pedal is armed with a 0-20 db clean boost, as well as a mix control which lets you dial in the perfect balance between distorted and clean signals. Rolled all the way up and with distortion maxed, the pedal sounds just like a vintage tube amp at full volume. Roll the Mix knob back a bit, and your clean signal starts to get through; if you pick lightly or roll back your guitar volume, you get a stunning clean, softly-clipping sound that retains all the feel and dynamics of your original tone, only bigger, louder and richer. The boost function lets you dial in a solo level, whether the overdrive circuit is activated or not.
System Type 2-way bass reflex speaker
Max SPL (@1m) 127 dB
Frequency Response (-10 dB) 61 Hz - 20 kHz
HF 1.35" driver
LF 10” - 2” V.C
Dispersion (HxV) 90° x 70°
Crossover Frequency 1780 Hz
Peak Power 400 W
Cooling Fan
DSP 28/56 bit
Advanced Functions FIR Filters
Connectors I/O CH1: Combo, CH2: XLR-F + 6.35 mm jack (1/4”), LINE OUT: XLR-M
Controls Channel level, MAIN level, PRESET, Channel 1 sensitivity, LINK/MIX output
Cabinet Multilayer wood with polyurea finish
Dimensions (W x H x D) 304 x 505 x 305 mm (11.9" x 19.9" x 12")
Weight 12.7 kg (28 lbs)
XVIVE pedals are meticulously designed by our USA Team to bring guitar and bass players professional quality pedals with an original tone at a competitive price. The XVIVE range of pedals continues to grow as we endeavour to bring you more and more exciting yet practical products. We also make our own pedal boards, power supplies, cables and patch leads to cater for all your gigging requirements.
Discover the XVIVE difference!
The USA Design Team
The XVIVE Audio USA Design Team is made up of musicians and engineers who have decades of professional experience.
Howard Davis works as our Chief Designer. He is well known for his many pedal designs for Electro Harmonix (1976 to 1981) and later did design work for Pigtronix (including the Mother Ship analog guitar Synthesizer). He has done independent design work for several artists and we are very happy to have him aboard.
Darius Mostowfi has been a DSP and analog expert.......
Active speaker
Loudspeakers: 12"/1"
Digital power amplifier
Power: 1200 W peak, 600 W RMS
Peak SPL: 129 dB
Asymmetrical horn tweeter 100° x85°
XLR and 6.3 jack input
56-Bit DSP
8 Sound presets for the monitor and stand application
2 Separately adjustable inputs with mix output
Multifunctional housing incl. slanted monitor angle
3x M10 rigging points
Dimensions: 350 x 642 x 349 mm
Weight: 14.3 kg
SMF500 LIGHT
Galli® Strings - With their warm and extremely dynamic sound, impeccable intonation and great elasticity to the touch, the SUPREMA MANDOLIN STRINGS by Gallistrings allow the mandolinist to play with excellent musical phrasing, wide expressiveness and skillful agility.
Thanks to their softness, they are particularly suitable for the mandolins of the great lutherie of the past.
CAT. N. NOTE DESCRIPTION INCH MM LBS KG
SMF5001 MI / E Plain Steel - Loop End .0095 0,24 14,2 7,1
SMF5002 LA / A Flat Wound .0135 0,35 15,1 6,9
SMF5003 RE / D Flat Wound .021 0,52 14,5 6,6
SMF5004 SOL / G Flat Wound .031 0,78 13,4 6,1
Finally, a professional string dampener / muting accessory that every studio, session player, and tapping aficionado should have! Slide on a FretWrap to effectively cut overtones and sympathetic resonance during recording, live performance, two-hand tapping, or any creative situation where you need that extra muting hand for cleaner takes without the unwanted string noise or ringing. The adjustable strap lets you fine-tune the pressure and dampening of the strings. Quickly slides over the headstock when not in use. No special guitar modification, installation, or tools required - Yet amazingly effective!
SM - Fits 4-string basses, 6-string electric and acoustic guitars, and ukeleles
MD - Fits 5-string basses & 6-string classical guitars
LG - Fits 6-string basses & 7- to 8-string guitars
XL - Fits 8- to 12-string basses, Chapman Sticks, double basses & other extended range guitars
Stunning full hollowbody guitar with double cutaway, licensed Bigsby, 648mm scaling, rosewood fingerboard and bridge. Body is constructed from solid maple top (yes solid ) , and laminated back and sides! Finished in deep wine colouring with abalone inlay and gold effect hardware!
Specifications
.500" medium large bore
8" bell
Chrome plated nickel silver inner slides
Lacquered brass finish
2C Blessing mouthpiece
Plush lined hard-shell molded case (C-128)
Made in Usa !
BESKRIVELSE SPECIFIKATION
The PARWASH 1415 QUAD developed by Algam Lighting is a must-have for any event or light show. This LED PAR is capable of generating a powerful light flow thanks to its 14 x 15W LEDs combined with 35° aperture optics, while generating rich, vibrant colors with its RGB+WW (Warm White) color palette. Ideal for a wide range of applications, the PARWASH 1415 QUAD features professional connectivity with a 3-point DMX input/output for precise lighting control and chaining with another PARWASH 1415 QUAD. To ensure safe operation, this Par Wash is equipped with a PowerCon locking electrical connector to prevent unintentional disconnection, plus a PowerCon output for powering another PARWASH 1415 QUAD. This high-performance machine is actively cooled to guarantee optimal operating conditions, whether on the floor or hanging from a double bracket.
Merish Bag
Handy semi-rigid carrier case in black polyester fabric with handle and very useful adjustable shoulder strap. Complete with removable PVC partition and roomy external pocket with its own zip fastener. Absolute convenience and great protection during transport thanks to stiffener lining 1 cm thick. Ideal for all M-Live products
Multi effect pedal
32-bit AD / DA
32-bit floating-point processor and 96 kHz sampling rate
New BOSS DSP engine, specially developed for audio applications
AIRD (Augmented Impulse Response Dynamics) brings BOSS's Tube Logic concept to a digital guitar processor
Allows natural integration of external devices
Extremely dynamically playable amplifiers
Massive selection of effects including BOSS MDP effects such as DD-500, MD-500, RV-500
Amplifiers and effects can be interconnected serially and in parallel
Fast switching of patches with delay / reverb "carryover function"
Innovative stomp box features
Easy operation with a large display and 6 assignable switches
10 Footswitches, integrated freely assignable expression pedal and coloured LEDs
High-resolution tuner in 2 display modes ............
SEE INFO
B112 is a versatile, portable, powerful active speaker suitable for applications in medium venues. The bass-reflex cabinet is equipped with a 12 woofer and a 1.35 compression driver boosted by a 1200 W Class D amp module.
88 keys
Legend '70s : ARTIST W EX FULL VERSION : ( SOUND MODULES : E.PIANO, SOUND COLLECTION, A.PIANO, CLAVI, EXTERNAL- CONTROL FOR EXTERNAL DEVICES )
The LEGEND '70s introduces the new concept of MODULAR STAGE PIANO that allows you to customize the instrument according to your needs. The superb sound quality, thanks to the unique VISCOUNT PM (Physical Modeling) technology and the accurate response of the keyboard, combined into a portable instrument of the highest quality.
VORTEX 315
Vortex 315, designed by Silvio della Mattia and Viscount, is the ultimate rotary speaker built specifically for organs using high quality materials and components. The most reliable sound in a lightweight rotary speaker.
Type 2 amplified channels (woofer with rotating drum + driver with rotating horn)
Power (W) 300W Upper 80W and Lower 220W
Crossover Frequency 800Hz
Subsonic filter Yes
HF Protection compressor, short circuit, thermal
PC Control Yes
Connections 3 pins IEC 250 VAC, 2x balanced input jacks, jack pedal, USB B TYpe, MIDI IN, UNDECAL 11 pin connector
Controls Volume, Equalizer (bass - mid gain - mid frequency - treble), 11 pin input sensitivity, FACTORY RESET, rotative presets selector
Engine Controls The led is: off when the motors are brake; yellow when the motors are slow; red when the motors are fast.
You can brake (independently from the horn) the rotor bass by it’s switch. .......
SEE INFO
Price € 2890,00
Features
600 W RMS Class D AMP
Selectable Stereo Balanced Input
Link or Xover Balanced Stereo Output Mode
Compact and sturdy wood cabinet
Lightweight
Polarity Switch
FLAT or BOOST Mode Switch
Technical Data
Speaker Type: Active Subwoofer
Acoustical data
Frequency Response [-10dB]: 42 – 124 Hz
Max SPL (1 m): 131 dB
Directivity: omnidirectional
LF: 15″
LF Voice Coil: 2.5″
Amplifier
Amp Technology: SMSP digital amplifier
Amp Class: Class D
RMS Power: 600 W
Peak Power: 1200 W
Processor
Controller: 28/56 bit DSP
Limiter: Peak, Thermal, RMS
Controls: Subwoofer level, Outputs mode, Polarity, Subwoofer mode
Input
Signal Input: 2x XLR (balanced)
Signal Output: 2x XLR (balanced)
Mechanics
Housing: Plywood
Grille: Full metal grid
Pole Mount: M20
Width: 430 mm (16.92 in)
Height: 580 mm (22.83 in)
Depth: 600 mm (23.62 in)
Weight: 25.5 kg (56.22 lbs)
BESKRIVELSE SPECIFIKATION
The BARWASH 244 is a versatile RGBW LED bar for all your architectural and performance lighting needs. Its 24 x 4W RGBW LEDs, each individually controllable in 8 groups, and 6 DMX control modes guarantee brilliant colors, impressive brightness and spectacular effects. The intuitive LCD interface and automatic music-detection modes make it easy to use for all types of performances and events. With its robust construction and universal mounting brackets, BARWASH 244 is easy to install in any configuration. Whether you're a lighting professional or a demanding amateur, BARWASH 244 is the ideal tool to enhance your events and spaces.
Size 50 x 60 cm
Wood body
Plastic drumhead
Pro Series
Top-Instruments for professional demands
Low root note, comparable with a large drum
Is played with a beater
Including tuning key
SoloStrap
Three styles. Two-tone. One amazing strap.
Drawn from the proven comfort, quality and unique construction of the DuoStrap Signature, the SoloStrap was designed for the most discerning guitarists and bassists. Using only the finest of leather hides from Europe, Canada, and South America, the SoloStrap is meticulously hand-crafted to create a blend of form and function that begs to be worn and shown off. The resilient contour padding wrapped with a beautiful vegetable-tanned leather top and an anti-slip suede bottom creates a lasting personal fit, with soft-rolled padded sides where it matters, and topped handsomely with our distinct stamped cover and antique-finished branded metal rivets.
Three gorgeous two-tone color combinations to choose from, with lengths adjustable from 38" to 50" and an extra-long option that brings the total usable length to 62". Padded area is 3.25" wide for excellent weight distribution and superior comfort.
The Pickport Studio is a specialized pick holder for all acoustic, electric and bass guitars. The Pickport Studio has been designed to mount to strap buttons, volume knobs, tone knobs, machine heads, pick guards and even Stratocaster jack plates. The Pickport is sturdy, flexible, decorative and can easily mount on your ax for as long as you wish.