2 MUDHONEYS IN 1 - DUAL DISTORTION
If you still haven’t heard a T-Rex Mudhoney, do yourself a favour and plug one in next time you’re at the music store.
Dirty and sweet, this classic dual distortion pedal has been praised for its amazing tonal range and ability to deliver everything from a smooth dirty edge to a harrowing wall of distorted sound. It’s one of first pedals we produced, and it set the standard for many T-Rex pedals to come.
Everything that is great about the original Mudhoney – and then doubles it! With two channels of vintage gain, you can easily switch between a clean sound from your amp, a nice edgy overdrive from the one Mudhoney channel and a thick warm distortion from the other channel – delivering deliciously dirty T-Rex tone all the way.
Revolutionary Sound Engine
At the core of the Legend One series is the Legend Soul Engine, powered by Viscount's proprietary TMT (Tonewheel Modeling Technology) and HDS (High-Definition Sampling). These technologies provide authentic organ tones, including detailed recreations of iconic models such as the B3 (1938), C3 (1955), A100 (1961), and more. The 91 tonewheels offer rich polyphony and realistic harmonic detail, capturing the essence of classic tonewheel organs.See more Info
Active High-Performance Column PA System
6x 2.5" Midrange speakers
8" Subwoofer
Power: 300 watts RMS, 1200 watts peak
Class D power amplifier
Maximum level: 118 dB
Frequency response: 50 - 20,000 Hz
Horn pattern: 120° x 30°
2 Switchable mic/line inputs: XLR/jack combo
2 RCA inputs
1 XLR mix output
Bluetooth 5.0 for audio streaming
Bluetooth TWS Link
3-Channel mixer
2-Channel equaliser
2 Mic preamps
Undervoltage, thermal, overcurrent protection
Limiter
Dispersion angle (H x V): 120° x 45°
Plastic housing
Dimensions (W x H x D): 302 x 2029 x 390 mm
Weight subwoofer: 13 kg
Weight top: 3.2 kg
Weight spacer: 2.3 kg
Total weight: 18.5 kg
Colour: Black
System Type Vented stereo sub
Max SPL (@1m) 131.5 dB
Frequency Response (-10 dB) 41 Hz - Cut freq
LF 18” - 4” V.C
Peak Power 1000 W
Cooling Passive radiator
DSP 28/56 bit
Connectors I/O CH1/CH2: Combo, LINE OUT: XRL-M (LINK+XOVER)
Controls LEVEL, XOVER selection, POLARITY selection
Cabinet Multilayer wood with polyurea finish
Dimensions (W x H x D) 510 x 650 x 690 mm (20" x 25.6" x 27.2")
Weight 38 kg (83.8 lbs)
Concerto Ukulele bag
15 mm padding
Made of rip-proof technical “gridding cloth” nylon with cloth outer border
Black color with orange finishings
Velcro reinforced easy-to-open handle
Adjustable double strap
Large frontal pocket
Strong zippers stitched with anti-rip nylon
Active speaker
Loudspeakers: 12"/1"
Digital power amplifier
Power: 1200 W peak, 600 W RMS
Peak SPL: 129 dB
Asymmetrical horn tweeter 100° x85°
XLR and 6.3 jack input
56-Bit DSP
8 Sound presets for the monitor and stand application
2 Separately adjustable inputs with mix output
Multifunctional housing incl. slanted monitor angle
3x M10 rigging points
Dimensions: 350 x 642 x 349 mm
Weight: 14.3 kg
B108 is a versatile, portable full-range active speaker suitable for small venue applications. The bass-reflex cabinet is equipped with a 8 woofer and a 1compression driver boosted by a 400 W amp module. Its advanced DSP featuring FIR filters
PN PURE NICKEL ELECTRIC, " Warm and Vintage tone" ! Pure nickel is an alternative to the brighter tone of nickel-plated.
In 50` it was the primary strings alloy. These strings provide a warm and vintage sound perfect for traditional blues,classic rock,rockabilly and more.....
A little over 40 years ago, largely because we could not afford to buy a high quality electric guitar, and partly because we enjoyed a challenge, my Dad and I decided to make an electric guitar. I designed an instrument from scratch, with the intention that it would have a capability beyond anything that was out there, more tunable, with a greater range of pitches and sounds, with a better tremolo, and with a capability of feeding back through the air in a "good" way - i.e. in a self-sustaining mode.
Se info
This guitar are with Brian May`s signature (autograf )
Stunning full hollowbody guitar with double cutaway, licensed Bigsby, 648mm scaling, rosewood fingerboard and bridge. Body is constructed from solid maple top (yes solid ) , and laminated back and sides! Finished in deep wine colouring with abalone inlay and gold effect hardware!
NAMED AFTER DANISH GUITARIST KNUD MØLLER
T-Rex Møller 2 delivers the same classic overdrive that made it's predecessor one of T-Rex’s most sought-after pedals. Named after Danish guitarist Knud Møller, for whom the original pedal was designed, Møller 2 features a more durable “Bass Boost” toggle switch and easier-to-read control knob graphics. The pedal is armed with a 0-20 db clean boost, as well as a mix control which lets you dial in the perfect balance between distorted and clean signals. Rolled all the way up and with distortion maxed, the pedal sounds just like a vintage tube amp at full volume. Roll the Mix knob back a bit, and your clean signal starts to get through; if you pick lightly or roll back your guitar volume, you get a stunning clean, softly-clipping sound that retains all the feel and dynamics of your original tone, only bigger, louder and richer. The boost function lets you dial in a solo level, whether the overdrive circuit is activated or not.
A single module for two synths! The FM Module for Legend ’70s gives you two layers of authentic FM synthesis and a selection of sounds from music history.
You can import DX-TX sounds from the available libraries. You will also have an FM synthesis editor to experiment with!
FM SYNTH MODULE
2 Layers of Stereo FM Synthesis totally independent
6 Operators
LFO and Pitch Envelope exactly as in the historical formulation of FM synthesis
Iconic Sounds of the Decades
Compatibility with DX-TX sounds from the libraries available
SEE MORE INFO
SPIN-TONE 700
The Spin-Tone amplifiers incorporate an hybrid system with a rotating horn in the upper part and powerful woofers in the lower; a unique Rotary speakers line dedicated to the organist’s needs!
Type 3 ways 3 amplifiers (2 speakers with woofer and tweeter for rotary effect or stationary + rotating driver)
Power (W) Lower 300W + 300W (L+R) - Upper 150W
Max SPL calculated (dB) 127
Crossover Frequency 1.2 Khz
Subsonic filter Yes
HF Protection compressor, short circuit, thermal
PC Control Yes
Connections 3 pins IEC 250 VAC, 2x balanced input jacks, jack pedal, USB B TYpe, MIDI IN, UNDECAL 11 pin connector
Controls Pedal input gain, Volume, Equalizer (bass - mid gain - mid frequency - treble), 11 pin input sensitivity, FACTORY RESET, rotative presets selector
Speakers 2x10" Woofer, PA Driver with rotating horn
Cabinet Plywood ...........m.m. Se Info
1200 W PEAK POWER
600 W RMS POWER
NEWLY DESIGNED ASYMMETRICAL HORN
ADVANCED DSP WITH FIR FILTERS
2 INPUT CHANNELS (MIC-LINE/MIC-INSTR)
SELECTABLE OUTPUT CHANNEL (LINK CH1/MIX CH 1+2)
8 EQ PRESETS
FRESH FULL GRILLE DESIGN
STAGE MONITOR USE
Technical Data
Speaker Type: 2-Way Active Speaker
Acoustical data
Frequency Response [-10dB]: 58 – 20.000 Hz
Frequency Response [- 3dB]: 70 – 19.600 Hz
Max SPL: 128 dB
HF: 1″ Exit, 1.4 v.c.
Type HF: Compression driver
Horizontal Directivity: 100° (85° up/120° down)
Vertical Directivity: 85° (+ 25°/-60°)
Horn: Asymmetrical Horn
LF: 10″, 2″ v.c.
It’s not easy to reinvent forgotten technology, but after many years of research, we found the lost secrets and brought back the authentic echoes from the 1950s. It’s known for its use in David Gilmour and Hank Marvin’s guitar tones, John Bonham even used it on drums!
The Binson Echorec provides a unique and distinguishing type of echo supplied by a rotating metal drum where the audio signal is recorded through a magnetic recording head. The Four Playback heads will allow you to choose individual echoes and swells.
BINSON ECHOREC REBORN BY T-REX EFFECTS DENMARK
Features
600 W RMS Class D AMP
Selectable Stereo Balanced Input
Link or Xover Balanced Stereo Output Mode
Compact and sturdy wood cabinet
Lightweight
Polarity Switch
FLAT or BOOST Mode Switch
Technical Data
Speaker Type: Active Subwoofer
Acoustical data
Frequency Response [-10dB]: 42 – 124 Hz
Max SPL (1 m): 131 dB
Directivity: omnidirectional
LF: 15″
LF Voice Coil: 2.5″
Amplifier
Amp Technology: SMSP digital amplifier
Amp Class: Class D
RMS Power: 600 W
Peak Power: 1200 W
Processor
Controller: 28/56 bit DSP
Limiter: Peak, Thermal, RMS
Controls: Subwoofer level, Outputs mode, Polarity, Subwoofer mode
Input
Signal Input: 2x XLR (balanced)
Signal Output: 2x XLR (balanced)
Mechanics
Housing: Plywood
Grille: Full metal grid
Pole Mount: M20
Width: 430 mm (16.92 in)
Height: 580 mm (22.83 in)
Depth: 600 mm (23.62 in)
Weight: 25.5 kg (56.22 lbs)
Entertainer Keyboard
61 Semi-weighted, velocity-sensitive keys with aftertouch
464 Voices with 3 different sounds each
62 Drum kits and 580 live drums
Dual/Layer
Split
Over 400 styles
4 Nanks with unlimited registrations each
216-Voice polyphonic
7" Touch screen display
15 Sliders with LED indicator
8 Pots
Pitch bend and modulation wheel
Audio and MIDI recording
Audio player with 5+1 multitracks
2 Separate players
Effects: DSP (reverb, chorus, flanger, overdrive, distortion, tremolo, autopan, equaliser, etc.)
3-Voice vocalist for mic input 1
240 GB SSD (80 GB for system)
SD card slot (up to 512 GB)
1 GB user sample memory
Bluetooth audio input
WiFi network connection to Ketron app
Dimensions (W x D x H): 925 x 365 x 125 mm
The Winterleaf Exotic TWX4CEK guitar is a masterfully crafted instrument that combines breathtaking aesthetics with exceptional acoustic-electric capabilities. Designed for discerning musicians, this guitar offers a harmonious blend of striking visual appeal and superior sound quality.
The Super Folk body shape of the TWX4CEK guitar is a work of art in itself. It presents a harmonious balance between the grand auditorium and folk body styles, resulting in an elegant and ergonomic design. This body shape boasts a slightly more compact and comfortable form, making it an ideal choice for players seeking both comfort and versatility. It fits snugly in your arms and offers an excellent projection of sound, making it suitable for a wide range of playing styles.
Range: Winerleaf Exotic
SEE INFO
Body Shape: Super Folk Cutaway
Top: Solid Mahogany, Koa Veneer
Back: Koa
Sides: Koa
Fingerboard: Eboncore
Electronics: Tanglewood Premium Plus
Finish: Autumn Burst Gloss
The Legend lower manual is the perfect addition to your Legend ONE keyboard, offering a second manual dedicated to the following features:
The most compact dual manual organ with two sets of drawbars.
If you have a small gig and a single manual is enough, from now on you can both travel light and expand your possibilities as needed!
It’s not just an organ; you have all the additional sounds too! You can put them on the upper or lower manual as you wish.
All you need is the 5-pin MIDI cable (included), which provides AC power and MIDI messages to enable communication between the two keyboards.
The removable half-moon switch on the Legend LM eases the rotary control.
If you’re feeling asymmetrical today, why not combine your Legend ONE 61 with a 73 base?
Transform your all-in-one keyboard into an all-in-one dual organ with high performance and compact dimensions and price.
Transporttaske og vogn
Til Viscount Legend Live og Legend Soul 261 orgel
Med forstærkede kanter og indvendig polstring
Håndtag
To rummelige sidelommer
Indvendige mål (B x H x D): 101 x 59 x 20 cm
Udvendige mål (B x H x D): 114 x 65 x 26 cm
Vægt: 10,3 kg
NYHED!
FLORIDA BAR II light stand RGB LED and FX projectors set
4-in-1 floor-standing LED spotlights
BESKRIVELSE SPECIFIKATION
- Light sources :
* PAR effect x2: 3 x 9W RGB LEDs
* Derby effect x2: 3 x 3W RGB LEDs
* Strobe effect: 4 x 1W white LEDs
* Laser effect: green 30mW / 532nm and red 100mW / 650nm
- Class 3B laser with security key and interlock connector
- Modes: Auto, Musical, Master/Slave and DMX
- Number of DMX channels: 3, 5, 9 or 27
- DMX input/output: XLR 3-pin
- Display: digital screen with 4 control buttons
- Chassis: steel and plastic
- Supply voltage: 100-240V 50/60 Hz
- Power consumption: 45W
- Weight: 6.6kg
- Protection rating: IP20 (indoor use)
- Inluded : power cable and Velcro fastener, tripod, IR remote control, carrying case
- Tripod: height-adjustable from 1.5m to 2.5m
Finally, a professional string dampener / muting accessory that every studio, session player, and tapping aficionado should have! Slide on a FretWrap to effectively cut overtones and sympathetic resonance during recording, live performance
, two-hand tapping, or any creative situation where you need that extra muting hand for cleaner takes without the unwanted string noise or ringing. The adjustable strap lets you fine-tune the pressure and dampening of the strings
. Quickly slides over the headstock when not in use. No special guitar modification, installation, or tools required - Yet amazingly effective!
SM - Fits 4-string basses, 6-string electric and acoustic guitars, and ukeleles
MD - Fits 5-string basses & 6-string classical guitars
LG - Fits 6-string basses & 7- to 8-string guitars
XL - Fits 8- to 12-string basses, Chapman Sticks, double basses & other extended range guitars
KALA FLATWOUND 4-STRING SET BY GALLISTRINGS
Chrome steel wrapped around a nylon core, the U•BASS® Flatwound 4-String Set by Gallistrings enables fast and stable intonation, bringing a warmth and consistency to your U•BASS® like never before.
These high-tension U•BASS® strings offer a timbre and maneuverability akin to the double bass. Smooth to the touch, the chrome flatwound tape allows your fingers to glide around the fretboard and helps protect the neck from wear and tear—perfect for any acoustic fretted or fretless U•BASS®. Scale length cm 52 - in. 20,5"
CAT. N. NOTE DESCRIPTION INCH MM LBS KG
UXB911C G-1st Chrome Steel on Nylon core .060 1.52 - -
UXB912C D-2nd Chrome Steel on Nylon core .080 2.03 - -
UXB913C A-3rd Chrome Steel on Nylon core .100 2.54 - -
UXB914C E-4th Chrome Steel on Nylon core .130 3.30 - -
1-EFFEKT PEDALER
-t.jpg)
-t.jpg)
