SPIN-TONE 700
The Spin-Tone amplifiers incorporate an hybrid system with a rotating horn in the upper part and powerful woofers in the lower; a unique Rotary speakers line dedicated to the organist’s needs!
Type 3 ways 3 amplifiers (2 speakers with woofer and tweeter for rotary effect or stationary + rotating driver)
Power (W) Lower 300W + 300W (L+R) - Upper 150W
Max SPL calculated (dB) 127
Crossover Frequency 1.2 Khz
Subsonic filter Yes
HF Protection compressor, short circuit, thermal
PC Control Yes
Connections 3 pins IEC 250 VAC, 2x balanced input jacks, jack pedal, USB B TYpe, MIDI IN, UNDECAL 11 pin connector
Controls Pedal input gain, Volume, Equalizer (bass - mid gain - mid frequency - treble), 11 pin input sensitivity, FACTORY RESET, rotative presets selector
Speakers 2x10" Woofer, PA Driver with rotating horn
Cabinet Plywood ...........m.m. Se Info
STRING CLEANER
D’Andrea USA’s String Cleaner & Lubricant prolongs string life and renews string tone by removing the oxidation and natural build up from hours of playing. Simply apply to a polish cloth and gently rub the strings up and down to bring your strings back to life while lubricating them for playing ease. Do not apply to any other surfaces other than your strings. Keep your instruments in tip-top shape with our professional line of Guitar Care Products.. Proudly Made in USA!
T-REX CREAMER REVERB
CREAMER - MAJOR REVERB
So, you finally got your rig dialed in and it sounds fantastic, but sometimes you feel like adding a bit of depth or airy-ness to it. You want to fill in the holes in your playing, add some ambience or you maybe just really like those dreamy, special sounds that seem to take on a life of their own.
HOWEVER, you don´t want to be lost in sub-menus or unfamiliar parameters, your pedal board is pretty much packed with all your precious goodies and you don´t want to ruin that tone you finally nailed.
We have designed the Creamer reverb to be dead simple to operate, but with just enough room for tweaking, so you don´t feel limited in your search for the sonic equivalent of Grand Canyon or that small room we frequently visit every day.
GM9882HP – Double handheld + headset UHF wireless microphone
Double handheld + headset UHF wireless microphone system with convenient ABS case for carriage 200 channels available (100+100) and Auto Scan system of free available frequencies. Infrared rays transmission towards the transmitter for a quick setting Frontal volume setting independent for each channel, two XLR outputs and one MIX Ø 6,3 mm jack output. Control LED for radio and audio frequency. External power supply included. Rack mount adapters included (1/2 rack).
The Pickport Studio is a specialized pick holder for all acoustic, electric and bass guitars. The Pickport Studio has been designed to mount to strap buttons, volume knobs, tone knobs, machine heads, pick guards and even Stratocaster jack plates. The Pickport is sturdy, flexible, decorative and can easily mount on your ax for as long as you wish.
VISCOUNT HURRICANE 210 STEREO POWERED LOUDSPEAKER BY KEYB, PROVIDES YOU THE PERFECT PORTABLE AMPLIFICATION SOLUTION FOR LEGEND ORGANS
EXPRESSLY DESIGNED IN COOPERATION WITH PROFESSIONAL PLAYERS
SELF-POWERED SPEAKER FEATURES WITH FOUR CLASS D AMPLIFIERS
THE SPECIAL SPEAKERS PLACEMENT ENHANCES THE ORGAN'S INTERNAL ROTARY EMULATION
OUTSTANDING SOUND QUALITY HIGH SOUND PRESSURE LEVEL AND LINEAR FREQUENCY RESPONSE
ON-BOARD USEFULL EQUALIZER
STATE-OF-THE ART ELECTROACOUSTIC COMPONENTS
COMPACT AND LIGHTWEIGHT DESIGN
Strings in black nylon tape wound on a stainless steel core: if used on a fretless electro-acoustic bass, make the instrument able to produce tones as a double bass.
System Type 2-way bass reflex speaker
Max SPL (@1m) 125 dB
Frequency Response (-10 dB) 63 Hz - 20 kHz
HF 1.35" driver
LF 8” - 2” V.C
Dispersion (HxV) 90° x 70°
Crossover Frequency 1800 Hz
Peak Power 400 W
Cooling Fan
DSP 28/56 bit
Advanced Functions FIR Filters
Connectors I/O CH1: Combo, CH2: XLR-F + 6.35 mm jack (1/4”), LINE OUT: XLR-M
Controls Channel level, MAIN level, PRESET, Channel 1 sensitivity, LINK/MIX output
Cabinet Multilayer wood with polyurea finish
Dimensions (W x H x D) 264 x 440 x 260 mm (10.4" x 17.3" x 10.3")
Weight 10.9 kg (24 lbs)
System Type Vented stereo sub
Max SPL (@1m) 130 dB
Frequency Response (-10 dB) 45 Hz - Cut freq
LF 15” - 4” V.C
Peak Power 1000 W
Cooling Passive radiator
DSP 28/56 bit
Connectors I/O CH1/CH2: Combo, LINE OUT: XRL-M (LINK+XOVER)
Controls LEVEL, XOVER selection, POLARITY selection
Cabinet Multilayer wood with polyurea finish
Dimensions (W x H x D) 430 x 580 x 590 mm (16.9" x 22.8" x 23.2")
Weight 31.9 kg (70.32 lbs)
The Galli Musical Strings Company was established by Tommaso Galli in 1890. At that time musical strings were handcrafted using gut.
In 1950 Roberto Galli, Tommaso’s son, joined the firm. Roberto inherited the talent of his father and in time became like his father a great expert, a maestro, in the art of musical string making.
In the 1970s Galli Strings introduced new technologically advanced equipment into their production process. Roberto Galli’s son, Tommaso, joined the company in 1985. Building on his grandfather’s and father’s musical and technical achievements, Tommaso Galli has extended into the twenty-first century the Galli tradition of developing and manufacturing fine musical strings.
Active Column PA System
2000 W Class D power amplifier
Max. SPL (sound pressure level): 127 dB
Frequency response: +/- 10 dB, 35 - 20,000 Hz
Horn characteristics: 120° x 30°
1" Compression driver with CD horn
6x 3" Midrange speakers
12" Bass speaker in the subwoofer
Various possibilities for setting up the column system by removing or implementing the spacer
4-Channel mixer
24-Bit DSP with 5 storable user presets (Mode, Master EQ, Delay, Display, Bluetooth)
3 Sound modes: Music, Voice, DJ
Adjustable system delay
Backlit LCD display
2 Switchable mic/line inputs: XLR/jack combo
1 Hi-Z Instrument input: Jack
1 Stereo input: RCA
1 Mix output: XLR
Bluetooth 5.0 for audio streaming
Subwoofer housing is made of birch/plywood
Bass dimensions (W x H x D): 36.6 x 67.5 x 54.1 cm
Bass weight: 22.1 kg
Top/Spacer dimensions (W x H x D): 10.8 x 82.5 x 9.8 cm
Weight of the top: 3.9 kg
Spacer weight : 2 kg
Total height: 2.18 m
Total weight: 28 kg
PN PURE NICKEL ELECTRIC, " Warm and Vintage tone" ! Pure nickel is an alternative to the brighter tone of nickel-plated.
In 50` it was the primary strings alloy. These strings provide a warm and vintage sound perfect for traditional blues,classic rock,rockabilly and more.....
Finally, a professional string dampener / muting accessory that every studio, session player, and tapping aficionado should have! Slide on a FretWrap to effectively cut overtones and sympathetic resonance during recording, live performance, two-hand tapping, or any creative situation where you need that extra muting hand for cleaner takes without the unwanted string noise or ringing. The adjustable strap lets you fine-tune the pressure and dampening of the strings. Quickly slides over the headstock when not in use. No special guitar modification, installation, or tools required - Yet amazingly effective!
SM - Fits 4-string basses, 6-string electric and acoustic guitars, and ukeleles
MD - Fits 5-string basses & 6-string classical guitars
LG - Fits 6-string basses & 7- to 8-string guitars
XL - Fits 8- to 12-string basses, Chapman Sticks, double basses & other extended range guitars
Tribute L-2000
Leos L serie basser, startede som en videreførelse af hans Music Man designs, og med to Humbucker pickups tilbød G&L noget på det tidspunkt, som ikke fandtes hos MM. L serien har siden starten fået sit eget liv, og både L-2000, og L-2500 (5 str) er blevet manges favorit bas, og i høj grad en bestseller i Tribute serien.
G&L er Leo Fenders sidste livsværk, skabt på erfaringerne fra Fender og Music Man, og designet i Leo’s workshop, på Fender Avenue 2548, i Fullerton, CA. Stedet hvor de første Music Mans blev bygget, og siden alle G&L USA modeller. Den lille fabrik kører stadig på højtryk, og Leo’s værksted står, som da han forlod det. Tradition og håndværk forenet. Tribute serien er fremstillet hos Cortek i Indonesien, og anvender G&L pickups og hardware!
Mikrofon kabel 9,0 meter XLR - XLR
99% pure Oxigen Free Copper (OFC), totally noiseless thanks to an internal semi-conductive PVC jacket
Audio signal cable with spiral > 94% coverage shield
Low capacitance: 85 pF/m It grants a clean and bright sound that is accurate to its source and high mechanical strenght while having a soft cable
Extremely sturdy: PVC and vulcanised silicone external coating for a maximum flexibility and a long durability
Resin injection to protect internal connections for an eternal duration
Vanguard catchy design
Hybrid connectors: mix between die-cast plastic body and chrome metal body for an exceptional robustness
MUDHONEY DISTORTION - THE ORIGINAL COLLECTION
The Mudhoney distortion was our first shot at making a great, all-round distortion box. That´s how most owners have described it - it just plain works for a lot of different music styles and they haven´t found a similar sound in many other pedals. In fact, there´s a story about a player that bought and sold six Mudhoney´s, before realizing that the pedals he replaced it with weren´t doing it for him, so he got the seventh one – and kept it.
Den nye Viscount Legend Live Orgel af KeyB, giver dig den nemmeste transportabel løsning.
To Waterfall Keyboards med high trigger points, for ultra hurtig respons. Legend Live anvender det nyeste modeleringteknologi i tonehjul.
Nem at afspille
Ny designet ”leslie” og forstærker simulator.
To fulde sæt af Drawbars pr. keyboard.
Forbedret Percussion og key click. (Soft/normal volume).
Effekter: Vibrato/Chorus og Reverb
Hurtig live justering, nemme at betjene.
Ekstern 11 pins Leslie® udgang.
FX send/return
Der er en USB udgang til nodelampe, iPad opladning m.m.
Soprano Ukulele bag
15 mm padding
Made of rip-proof technical “gridding cloth” nylon with cloth outer border
Black color with orange finishings
Velcro reinforced easy-to-open handle
Adjustable double strap
Large frontal pocket
Strong zippers stitched with anti-rip nylon
100 watts RMS
12" HH Blue 1220200-4 Professional Woofer
Two Channels. FET and Drive, with mix options for gritty drive whilst maintaining clarity.
Preshape Switch, provides a mid-frequency cut for a scooped sound whilst pushing the tops and lows.
Bass (±12dB), Middle (±12dB) with four switchable voicing options, Treble (±12dB)
TILT function
Precision-crafted 15mm Plywood cabinet for optimal strength, reduced weight, and a resonant, natural tonal character.
Top mounted steel reinforced strap handle for comfortable and easy transportation
Hard wearing black vinyl, Steel Corners for enhanced protection
AUX in
3.5mm Stereo Headphone Jack
FX Loop
FX send doubles as line out
Balanced Male XLR D.I. Output (Pre EQ)
Removable front baffle
Master Volume
Remote socket for optional FS-1 MINI - switches Drive
Internal universal 100-200V~ 50/60Hz, Switched mode power supply. IEC C14 inlet connector
System Type 2-way bass reflex speaker
Max SPL (@1m) 127 dB
Frequency Response (-10 dB) 61 Hz - 20 kHz
HF 1.35" driver
LF 10” - 2” V.C
Dispersion (HxV) 90° x 70°
Crossover Frequency 1780 Hz
Peak Power 400 W
Cooling Fan
DSP 28/56 bit
Advanced Functions FIR Filters
Connectors I/O CH1: Combo, CH2: XLR-F + 6.35 mm jack (1/4”), LINE OUT: XLR-M
Controls Channel level, MAIN level, PRESET, Channel 1 sensitivity, LINK/MIX output
Cabinet Multilayer wood with polyurea finish
Dimensions (W x H x D) 304 x 505 x 305 mm (11.9" x 19.9" x 12")
Weight 12.7 kg (28 lbs)