Electric Bass
Body: Alder
Maple neck
Pau Ferro fretboard
Matte neck finish
20 Frets
Nut width: 41.3 mm
Scale: 864 mm
Pickups: New Player AlNiCo V Precision Split single coil
Volume knob and tone knob
Standard open gear machine heads
Ex-factory stringing: Fender 7250M .045 - .105
Colour: 3-Tone sunburst
Active high-performance column PA system
1" Compression driver with CD horn
6x 3" Centre speaker
10" Long excursion sub-woofer
Power: 2000 Watt
Class D power amplifier
Maximum level: 126 dB Peak
Frequency response +/- 10 dB: 38 - 20,000 Hz
Horn characteristic: 120° x 30°
24-Bit DSP with storable 5 User Presets: Mode, Master EQ,Delay, Display, Bluetooth
Modes: 3 Basic settings for Music, Voice and DJ
System delay adjustable
Illuminated LC display
4 Channel mixer
2 Switchable mic/line inputs: XLR/jack combo
1 HiZ instrument input
1 RCA stereo input
1 XLR mix output
Bluetooth 5.0 for audio streaming
Variable column construction with or without spacer element
Sub-woofer cabinet made of birch/multiplex wood
Bass dimensions (W x H x D): 36.6 x 62.5 x 54.1 cm
Bass weight: 21 kg
Dimensions of top/spacer (W x H x D): 10.8 x 82.5 x 9.8 cm
Weight of top: 3.9 kg
Weight of spacer: 2 kg
Total height: 2.13 m
Total weight 26.9 kg
Finally, a professional string dampener / muting accessory that every studio, session player, and tapping aficionado should have! Slide on a FretWrap to effectively cut overtones and sympathetic resonance during recording, live performance
, two-hand tapping, or any creative situation where you need that extra muting hand for cleaner takes without the unwanted string noise or ringing. The adjustable strap lets you fine-tune the pressure and dampening of the strings
. Quickly slides over the headstock when not in use. No special guitar modification, installation, or tools required - Yet amazingly effective!
SM - Fits 4-string basses, 6-string electric and acoustic guitars, and ukeleles
MD - Fits 5-string basses & 6-string classical guitars
LG - Fits 6-string basses & 7- to 8-string guitars
XL - Fits 8- to 12-string basses, Chapman Sticks, double basses & other extended range guitars
NAMED AFTER DANISH GUITARIST KNUD MØLLER
T-Rex Møller 2 delivers the same classic overdrive that made it's predecessor one of T-Rex’s most sought-after pedals. Named after Danish guitarist Knud Møller, for whom the original pedal was designed, Møller 2 features a more durable “Bass Boost” toggle switch and easier-to-read control knob graphics. The pedal is armed with a 0-20 db clean boost, as well as a mix control which lets you dial in the perfect balance between distorted and clean signals. Rolled all the way up and with distortion maxed, the pedal sounds just like a vintage tube amp at full volume. Roll the Mix knob back a bit, and your clean signal starts to get through; if you pick lightly or roll back your guitar volume, you get a stunning clean, softly-clipping sound that retains all the feel and dynamics of your original tone, only bigger, louder and richer. The boost function lets you dial in a solo level, whether the overdrive circuit is activated or not.
Multi effect pedal
32-bit AD / DA
32-bit floating-point processor and 96 kHz sampling rate
New BOSS DSP engine, specially developed for audio applications
AIRD (Augmented Impulse Response Dynamics) brings BOSS's Tube Logic concept to a digital guitar processor
Allows natural integration of external devices
Extremely dynamically playable amplifiers
Massive selection of effects including BOSS MDP effects such as DD-500, MD-500, RV-500
Amplifiers and effects can be interconnected serially and in parallel
Fast switching of patches with delay / reverb "carryover function"
Innovative stomp box features
Easy operation with a large display and 6 assignable switches
10 Footswitches, integrated freely assignable expression pedal and coloured LEDs
High-resolution tuner in 2 display modes ............
SEE INFO
Made famous by the Gretch White Falcon, this stunning guitar with abalone inlay and gold effect hardware is second to none. Comes with dual filtertrons, licensed Bigsby and gold effect hardware! 648mm scaling. Maple neck and rosewood fingerboard and bridge finish the guitar of nicely.
KALA FLATWOUND 4-STRING SET BY GALLISTRINGS
Chrome steel wrapped around a nylon core, the U•BASS® Flatwound 4-String Set by Gallistrings enables fast and stable intonation, bringing a warmth and consistency to your U•BASS® like never before.
These high-tension U•BASS® strings offer a timbre and maneuverability akin to the double bass. Smooth to the touch, the chrome flatwound tape allows your fingers to glide around the fretboard and helps protect the neck from wear and tear—perfect for any acoustic fretted or fretless U•BASS®. Scale length cm 52 - in. 20,5"
CAT. N. NOTE DESCRIPTION INCH MM LBS KG
UXB911C G-1st Chrome Steel on Nylon core .060 1.52 - -
UXB912C D-2nd Chrome Steel on Nylon core .080 2.03 - -
UXB913C A-3rd Chrome Steel on Nylon core .100 2.54 - -
UXB914C E-4th Chrome Steel on Nylon core .130 3.30 - -
Vis oversættelse
24-Channel mixing console with integrated stage box and DSP
Parallel multitrack recording to USB drive & DAW
20 Mic / Line inputs: 10x XLR, 10x 6.3 mm jack combo
2 RCA line inputs
2-Channel USB media player (MP3, WAV, AIFF playback)
22-Channel USB direct-to-memory recording
32-Channel recording interface (I/O via USB-B port)
Internal sample rate: 48 kHz
2 Additional USB ports for controllers & updates
2 XLR & jack main outputs
8 XLR AUX outputs
2 Headphone outputs
RJ45 Ethernet connector
HDMI port for mixer control via a monitor
Integrated dualband WLAN & Ethernet (2 antennas, 2.4 / 5 GHz)
Compatible with iOS, Android, Windows, Mac OS, Linux (via HTML5)
Accepts up to 10 devices simultaneously (tablet, smartphone, PC)
Signal processing from dbx, Lexicon, Digitech
20 High-quality Studer designed mic preamps
SEE INFO
Samme følelse af de originale tonehjul i orgelens pedal . Den er bare kortere og lettere. Der er kun 18 noter. Perfekt til giggins musikere. Volume pedal medfølger.
1 strømforsyning er inkluderet. Men hvis du spiller det med en Legend eller en Legend Live, behøver du ikke det, pedalboardet er drevet via midi-kabel.
Pedalboard 18 er en MIDI pedalboard, du kan bruge den med andre mærker, med MIDI instrumenter.
The M4000D Mini Mellotron was developed to meet the needs of keyboardists who want an even smaller and lighter Digital Mellotron. The Mini is also designed to fit perfectly on top of the regular M4000D to make a great looking dual manual Mellotron. Instead of the M4000D’s wooden keyboard, it includes a high-quality, semi-weighted Fatar piano-style keyboard with velocity sensitivity, and mono aftertouch.
1200 W PEAK POWER
600 W RMS POWER
NEWLY DESIGNED ASYMMETRICAL HORN
ADVANCED DSP WITH FIR FILTERS
2 INPUT CHANNELS (MIC-LINE/MIC-INSTR)
SELECTABLE OUTPUT CHANNEL (LINK CH1/MIX CH 1+2)
8 EQ PRESETS
FRESH FULL GRILLE DESIGN
STAGE MONITOR USE
Technical Data
Speaker Type: 2-Way Active Speaker
Acoustical data
Frequency Response [-10dB]: 58 – 20.000 Hz
Frequency Response [- 3dB]: 70 – 19.600 Hz
Max SPL: 128 dB
HF: 1″ Exit, 1.4 v.c.
Type HF: Compression driver
Horizontal Directivity: 100° (85° up/120° down)
Vertical Directivity: 85° (+ 25°/-60°)
Horn: Asymmetrical Horn
LF: 10″, 2″ v.c.
Active High-Performance Column PA System
6x 2.5" Midrange speakers
8" Subwoofer
Power: 300 watts RMS, 1200 watts peak
Class D power amplifier
Maximum level: 118 dB
Frequency response: 50 - 20,000 Hz
Horn pattern: 120° x 30°
2 Switchable mic/line inputs: XLR/jack combo
2 RCA inputs
1 XLR mix output
Bluetooth 5.0 for audio streaming
Bluetooth TWS Link
3-Channel mixer
2-Channel equaliser
2 Mic preamps
Undervoltage, thermal, overcurrent protection
Limiter
Dispersion angle (H x V): 120° x 45°
Plastic housing
Dimensions (W x H x D): 302 x 2029 x 390 mm
Weight subwoofer: 13 kg
Weight top: 3.2 kg
Weight spacer: 2.3 kg
Total weight: 18.5 kg
Colour: Black
NYHED!
FLORIDA BAR II light stand RGB LED and FX projectors set
4-in-1 floor-standing LED spotlights
BESKRIVELSE SPECIFIKATION
- Light sources :
* PAR effect x2: 3 x 9W RGB LEDs
* Derby effect x2: 3 x 3W RGB LEDs
* Strobe effect: 4 x 1W white LEDs
* Laser effect: green 30mW / 532nm and red 100mW / 650nm
- Class 3B laser with security key and interlock connector
- Modes: Auto, Musical, Master/Slave and DMX
- Number of DMX channels: 3, 5, 9 or 27
- DMX input/output: XLR 3-pin
- Display: digital screen with 4 control buttons
- Chassis: steel and plastic
- Supply voltage: 100-240V 50/60 Hz
- Power consumption: 45W
- Weight: 6.6kg
- Protection rating: IP20 (indoor use)
- Inluded : power cable and Velcro fastener, tripod, IR remote control, carrying case
- Tripod: height-adjustable from 1.5m to 2.5m
STRING CLEANER
D’Andrea USA’s String Cleaner & Lubricant prolongs string life and renews string tone by removing the oxidation and natural build up from hours of playing. Simply apply to a polish cloth and gently rub the strings up and down to bring your strings back to life while lubricating them for playing ease. Do not apply to any other surfaces other than your strings. Keep your instruments in tip-top shape with our professional line of Guitar Care Products.. Proudly Made in USA!
Features
600 W RMS Class D AMP
Selectable Stereo Balanced Input
Link or Xover Balanced Stereo Output Mode
Compact and sturdy wood cabinet
Lightweight
Polarity Switch
FLAT or BOOST Mode Switch
Technical Data
Speaker Type: Active Subwoofer
Acoustical data
Frequency Response [-10dB]: 42 – 124 Hz
Max SPL (1 m): 131 dB
Directivity: omnidirectional
LF: 15″
LF Voice Coil: 2.5″
Amplifier
Amp Technology: SMSP digital amplifier
Amp Class: Class D
RMS Power: 600 W
Peak Power: 1200 W
Processor
Controller: 28/56 bit DSP
Limiter: Peak, Thermal, RMS
Controls: Subwoofer level, Outputs mode, Polarity, Subwoofer mode
Input
Signal Input: 2x XLR (balanced)
Signal Output: 2x XLR (balanced)
Mechanics
Housing: Plywood
Grille: Full metal grid
Pole Mount: M20
Width: 430 mm (16.92 in)
Height: 580 mm (22.83 in)
Depth: 600 mm (23.62 in)
Weight: 25.5 kg (56.22 lbs)
TYPE 5 String G Banjo
TUNING G, D, G, B, D
BRACKETS 18
RESONATOR Maple
SIDES Maple
FINGERBOARD Techwood
BRIDGE Maple with Ebony tip
HEAD Remo Ivory
FINISH Natural Gloss
The Pickport Studio is a specialized pick holder for all acoustic, electric and bass guitars. The Pickport Studio has been designed to mount to strap buttons, volume knobs, tone knobs, machine heads, pick guards and even Stratocaster jack plates. The Pickport is sturdy, flexible, decorative and can easily mount on your ax for as long as you wish.
Active Column PA System
2000 W Class D power amplifier
Max. SPL (sound pressure level): 127 dB
Frequency response: +/- 10 dB, 35 - 20,000 Hz
Horn characteristics: 120° x 30°
1" Compression driver with CD horn
6x 3" Midrange speakers
12" Bass speaker in the subwoofer
Various possibilities for setting up the column system by removing or implementing the spacer
4-Channel mixer
24-Bit DSP with 5 storable user presets (Mode, Master EQ, Delay, Display, Bluetooth)
3 Sound modes: Music, Voice, DJ
Adjustable system delay
Backlit LCD display
2 Switchable mic/line inputs: XLR/jack combo
1 Hi-Z Instrument input: Jack
1 Stereo input: RCA
1 Mix output: XLR
Bluetooth 5.0 for audio streaming
Subwoofer housing is made of birch/plywood
Bass dimensions (W x H x D): 36.6 x 67.5 x 54.1 cm
Bass weight: 22.1 kg
Top/Spacer dimensions (W x H x D): 10.8 x 82.5 x 9.8 cm
Weight of the top: 3.9 kg
Spacer weight : 2 kg
Total height: 2.18 m
Total weight: 28 kg
Tanglewood TUR8 Parlour Resonator, All Mahogany, Vintage Burst Gloss, with Chrome Cone.
Union Resonator fra TW er kompakt, og i parlor størrelse, hvilket både gør den let at håndtere, både på scenen og hjemme i sofaen. Samtidig giver den kompakte krop, en meget fokuseret tone, som egner sig godt til netop Resonator, blandet med varmen fra Mahogni kroppen. Den flotte Vintage Burst, matcher fint de synlige åretegninger, og en smuk Hi Gloss finish gør denne guitar til et smukt syn
SPIN-TONE 400
Spin-Tone 400 is our 3-way amplifier equipped with 2 speakers with woofer and tweeter for rotary or stationary effect and a rotating driver, specifically designed to reproduce the original rotary horn amplifiers. The Spin-Tone 400 (400W), with its 23,5 kg, is the most portable solution for gigs and the perfect amp to connect to your Legend Soul, or any other instrument of our line and not, bringing that vintage touch that will make the difference.
Se Info
Finally, a professional string dampener / muting accessory that every studio, session player, and tapping aficionado should have! Slide on a FretWrap to effectively cut overtones and sympathetic resonance during recording, live performance, two-hand tapping, or any creative situation where you need that extra muting hand for cleaner takes without the unwanted string noise or ringing. The adjustable strap lets you fine-tune the pressure and dampening of the strings. Quickly slides over the headstock when not in use. No special guitar modification, installation, or tools required - Yet amazingly effective!
SM - Fits 4-string basses, 6-string electric and acoustic guitars, and ukeleles
MD - Fits 5-string basses & 6-string classical guitars
LG - Fits 6-string basses & 7- to 8-string guitars
XL - Fits 8- to 12-string basses, Chapman Sticks, double basses & other extended range guitars
System Type 2-way bass reflex speaker
Max SPL (@1m) 132 dB
Frequency Response (-10 dB) 48 Hz - 20 kHz
HF 1.75" driver
LF 15” - 3” V.C
Dispersion (HxV) 90° x 40°
Crossover Frequency 1450 Hz
Peak Power 1200 W
Cooling Passive radiator
DSP 28/56 bit
Advanced Functions FIR Filters
Connectors I/O CH1: Combo, CH2: XLR-F + 6.35 mm jack (1/4”), LINE OUT: XLR-M
Controls Channel level, MAIN level, PRESET, Channel 1 sensitivity, LINK/MIX output
Cabinet Multilayer wood with polyurea finish
Dimensions (W x H x D) 427 x 705 x 428 mm (16.8" x 27.8" x 16.9")
Weight 25.9 Kg (57 lbs)
SHAPE Super Folk
TOP Solid Spruce or Solid Cedar
BACK Amara/Spalt Mango
SIDES Amara
FINGERBOARD Techwood
BRIDGE Techwood
STRINGS Elixir Nanoweb 12-53
ELECTRONICS Fishman Presys
FINISH Natural Gloss
Full Specification TWJSFCE
Extensible arm microphone stand. Adjustable elevation arm and professional knob for the height fastening equipped with fixed desktop stand. Suggested for radio installations and dubbing studios.
Maximum Height 100 cm.
Weight1,2 Kg.
Maximum Carriage Capacity1,8 Kg.
Total Volume 0,068 cbm.
Color Black
Material of Construction steel
LEGEND SOUL ORGANS
Legend Soul line is born thanks to the Viscount centennial experience in projecting and making instruments. Our purpose was creating new digital tonewheels organs able to reproduce the original and iconic 9 contacts effect as much realistic as possible. After several studies, our engineers have managed to perfectly recreate all of them, using a unique technology patented by us. Thanks to that, when you play one of our Legend Soul, you will feel the iconic and realistic sounds of original tonewheels organ, but with all the advantages of the digital ones.