Transporttaske og vogn
Til Viscount Legend Live og Legend Soul 261 orgel
Med forstærkede kanter og indvendig polstring
Håndtag
To rummelige sidelommer
Indvendige mål (B x H x D): 101 x 59 x 20 cm
Udvendige mål (B x H x D): 114 x 65 x 26 cm
Vægt: 10,3 kg
Stunning full hollowbody guitar with double cutaway, licensed Bigsby, 648mm scaling, rosewood fingerboard and bridge. Body is constructed from solid maple top (yes solid ) , and laminated back and sides! Finished in deep wine colouring with abalone inlay and gold effect hardware!
Den nye Viscount Legend Live Orgel af KeyB, giver dig den nemmeste transportabel løsning.
To Waterfall Keyboards med high trigger points, for ultra hurtig respons. Legend Live anvender det nyeste modeleringteknologi i tonehjul.
Nem at afspille
Ny designet ”leslie” og forstærker simulator.
To fulde sæt af Drawbars pr. keyboard.
Forbedret Percussion og key click. (Soft/normal volume).
Effekter: Vibrato/Chorus og Reverb
Hurtig live justering, nemme at betjene.
Ekstern 11 pins Leslie® udgang.
FX send/return
Der er en USB udgang til nodelampe, iPad opladning m.m.
Active Column PA System
2000 W Class D power amplifier
Max. SPL (sound pressure level): 127 dB
Frequency response: +/- 10 dB, 35 - 20,000 Hz
Horn characteristics: 120° x 30°
1" Compression driver with CD horn
6x 3" Midrange speakers
12" Bass speaker in the subwoofer
Various possibilities for setting up the column system by removing or implementing the spacer
4-Channel mixer
24-Bit DSP with 5 storable user presets (Mode, Master EQ, Delay, Display, Bluetooth)
3 Sound modes: Music, Voice, DJ
Adjustable system delay
Backlit LCD display
2 Switchable mic/line inputs: XLR/jack combo
1 Hi-Z Instrument input: Jack
1 Stereo input: RCA
1 Mix output: XLR
Bluetooth 5.0 for audio streaming
Subwoofer housing is made of birch/plywood
Bass dimensions (W x H x D): 36.6 x 67.5 x 54.1 cm
Bass weight: 22.1 kg
Top/Spacer dimensions (W x H x D): 10.8 x 82.5 x 9.8 cm
Weight of the top: 3.9 kg
Spacer weight : 2 kg
Total height: 2.18 m
Total weight: 28 kg
Strings in black nylon tape wound on a stainless steel core: if used on a fretless electro-acoustic bass, make the instrument able to produce tones as a double bass.
Finally, a professional string dampener / muting accessory that every studio, session player, and tapping aficionado should have! Slide on a FretWrap to effectively cut overtones and sympathetic resonance during recording, live performance
, two-hand tapping, or any creative situation where you need that extra muting hand for cleaner takes without the unwanted string noise or ringing. The adjustable strap lets you fine-tune the pressure and dampening of the strings
. Quickly slides over the headstock when not in use. No special guitar modification, installation, or tools required - Yet amazingly effective!
SM - Fits 4-string basses, 6-string electric and acoustic guitars, and ukeleles
MD - Fits 5-string basses & 6-string classical guitars
LG - Fits 6-string basses & 7- to 8-string guitars
XL - Fits 8- to 12-string basses, Chapman Sticks, double basses & other extended range guitars
Finally, a professional string dampener / muting accessory that every studio, session player, and tapping aficionado should have! Slide on a FretWrap to effectively cut overtones and sympathetic resonance during recording, live performance, two-hand tapping, or any creative situation where you need that extra muting hand for cleaner takes without the unwanted string noise or ringing. The adjustable strap lets you fine-tune the pressure and dampening of the strings. Quickly slides over the headstock when not in use. No special guitar modification, installation, or tools required - Yet amazingly effective!
SM - Fits 4-string basses, 6-string electric and acoustic guitars, and ukeleles
MD - Fits 5-string basses & 6-string classical guitars
LG - Fits 6-string basses & 7- to 8-string guitars
XL - Fits 8- to 12-string basses, Chapman Sticks, double basses & other extended range guitars
Strings in black nylon tape wound on a stainless steel core: if used on a fretless electro-acoustic bass, make the instrument able to produce tones as a double bass. 5 strings
SHAPE Super Folk
TOP Solid Spruce or Solid Cedar
BACK Amara/Spalt Mango
SIDES Amara
FINGERBOARD Techwood
BRIDGE Techwood
STRINGS Elixir Nanoweb 12-53
ELECTRONICS Fishman Presys
FINISH Natural Gloss
Full Specification TWJSFCE
PX1
PX1 is a multifunctional foldable music stand. Thanks to its particular design, the product is stable in any position of its use. The board can be removed and folded. This part is made of shock-resistant but flexible ABS, so that to avoid damages due to accidental falls. PX1 Music Stand is equipped with a storage compartment and two retractable holders to hang headphone and violin, cello or double bass bow. Useful also for any other proper use. In case of large music sheets, board extensions named PX1A are available as separate and optional accessories. The extensions are to be connected on the board lateral rails.
Inc. Bag
‘The British Sound’
Formidable weaponry
It was the Who’s John Entwistle who first traded in his Marshall stacks in favour of Sound City at the beginning of 1967, and Pete Townshend followed later that year.
At this time, Dave Reeves was providing Sound City with the amplifiers, OEM. They were the first in a lineage of amplifiers that would quickly evolve into Hiwatt.
Also, around this time, Jimi Hendrix and his manager Chas Chandler approached Townshend, asking for his opinion on amplification. He told them that he had stopped using Marshall, as he thought Sound City were better. The Jimi Hendrix Experience subsequentlystarted using Sound City rigs, but set them up together with their Marshall stacks instead of replacing them.
In late 1968, The Who approached Dallas Arbiter, the makers of Sound City, asking if their equipment could be modified slightly. This request was denied, but independent amp designer and manufacturer Dave Reeves agreed, and created customised L100 amplifier
40 years standing by your side
Welcome to the Bespeco world!
Established in 1981, we are an Italian Company designing, engineering, manufacturing and commercializing accessories for musical instruments.
Through constant cooperation with musicians, sound technicians and engineers we are able to build functional, sturdy and durable products, each with its own distinctive design. High quality accessories that will always come with you.
Wherever you find music, you always find an accessory: be it a cable, a guitar stand, a microphone stand, a case to protect your instrument and many more. ........
See more I (info )
We wish you a good watching!
The Galli Musical Strings Company was established by Tommaso Galli in 1890. At that time musical strings were handcrafted using gut.
In 1950 Roberto Galli, Tommaso’s son, joined the firm. Roberto inherited the talent of his father and in time became like his father a great expert, a maestro, in the art of musical string making.
In the 1970s Galli Strings introduced new technologically advanced equipment into their production process. Roberto Galli’s son, Tommaso, joined the company in 1985. Building on his grandfather’s and father’s musical and technical achievements, Tommaso Galli has extended into the twenty-first century the Galli tradition of developing and manufacturing fine musical strings.
2 MUDHONEYS IN 1 - DUAL DISTORTION
If you still haven’t heard a T-Rex Mudhoney, do yourself a favour and plug one in next time you’re at the music store.
Dirty and sweet, this classic dual distortion pedal has been praised for its amazing tonal range and ability to deliver everything from a smooth dirty edge to a harrowing wall of distorted sound. It’s one of first pedals we produced, and it set the standard for many T-Rex pedals to come.
Everything that is great about the original Mudhoney – and then doubles it! With two channels of vintage gain, you can easily switch between a clean sound from your amp, a nice edgy overdrive from the one Mudhoney channel and a thick warm distortion from the other channel – delivering deliciously dirty T-Rex tone all the way.
Made famous by the Gretch White Falcon, this stunning guitar with abalone inlay and gold effect hardware is second to none. Comes with dual filtertrons, licensed Bigsby and gold effect hardware! 648mm scaling. Maple neck and rosewood fingerboard and bridge finish the guitar of nicely.
GM9882HP – Double handheld + headset UHF wireless microphone
Double handheld + headset UHF wireless microphone system with convenient ABS case for carriage 200 channels available (100+100) and Auto Scan system of free available frequencies. Infrared rays transmission towards the transmitter for a quick setting Frontal volume setting independent for each channel, two XLR outputs and one MIX Ø 6,3 mm jack output. Control LED for radio and audio frequency. External power supply included. Rack mount adapters included (1/2 rack).
GM9882 – Double handheld UHF wireless microphone
Double handheld UHF wireless microphone system with convenient ABS case for carriage. 200 channels available (100+100) and Auto Scan system of free available frequencies. Infrared rays transmission towards the transmitter for a quick setting. Frontal volume setting independent for each channel, two XLR outputs and one MIX Ø 6,3 mm jack output. Control LED for radio and audio frequency. External power supply included. Rack mount adapters included (1/2 rack).
A single module for two synths! The FM Module for Legend ’70s gives you two layers of authentic FM synthesis and a selection of sounds from music history.
You can import DX-TX sounds from the available libraries. You will also have an FM synthesis editor to experiment with!
FM SYNTH MODULE
2 Layers of Stereo FM Synthesis totally independent
6 Operators
LFO and Pitch Envelope exactly as in the historical formulation of FM synthesis
Iconic Sounds of the Decades
Compatibility with DX-TX sounds from the libraries available
SEE MORE INFO
50 watts RMS
10" HH AUDIO Professional Woofer
Two Channels. FET and Drive, with mix options for gritty drive whilst maintaining clarity.
Preshape Switch, provides a mid-frequency cut for a scooped sound whilst pushing the tops and lows.
3-Band EQ
TILT function
Precision-crafted 15mm Plywood cabinet for optimal strength, reduced weight, and a resonant, natural tonal character.
Top mounted steel reinforced strap handle for comfortable and easy transportation
Hard wearing black vinyl, Steel Corners for enhanced protection
3.5mm AUX in
3.5mm Stereo Headphone Jack
DIGBETH styling
FX Loop
FX send doubles as line out
Balanced Male XLR D.I. Output (Pre EQ)
Removable front baffle
Internal universal 100-200V~ 50/60Hz, Switched mode power supply. IEC C14 inlet connector
Samme følelse af de originale tonehjul i orgelens pedal . Den er bare kortere og lettere. Der er kun 18 noter. Perfekt til giggins musikere. Volume pedal medfølger.
1 strømforsyning er inkluderet. Men hvis du spiller det med en Legend eller en Legend Live, behøver du ikke det, pedalboardet er drevet via midi-kabel.
Pedalboard 18 er en MIDI pedalboard, du kan bruge den med andre mærker, med MIDI instrumenter.
Extensible arm microphone stand. Adjustable elevation arm and professional knob for the height fastening equipped with fixed desktop stand. Suggested for radio installations and dubbing studios.
Maximum Height 100 cm.
Weight1,2 Kg.
Maximum Carriage Capacity1,8 Kg.
Total Volume 0,068 cbm.
Color Black
Material of Construction steel
Finally, a professional string dampener / muting accessory that every studio, session player, and tapping aficionado should have! Slide on a FretWrap to effectively cut overtones and sympathetic resonance during recording, live performance, two-hand tapping, or any creative situation where you need that extra muting hand for cleaner takes without the unwanted string noise or ringing. The adjustable strap lets you fine-tune the pressure and dampening of the strings. Quickly slides over the headstock when not in use. No special guitar modification, installation, or tools required - Yet amazingly effective!
SM - Fits 4-string basses, 6-string electric and acoustic guitars, and ukeleles
MD - Fits 5-string basses & 6-string classical guitars
LG - Fits 6-string basses & 7- to 8-string guitars
XL - Fits 8- to 12-string basses, Chapman Sticks, double basses & other extended range guitars
T-REX CREAMER REVERB
CREAMER - MAJOR REVERB
So, you finally got your rig dialed in and it sounds fantastic, but sometimes you feel like adding a bit of depth or airy-ness to it. You want to fill in the holes in your playing, add some ambience or you maybe just really like those dreamy, special sounds that seem to take on a life of their own.
HOWEVER, you don´t want to be lost in sub-menus or unfamiliar parameters, your pedal board is pretty much packed with all your precious goodies and you don´t want to ruin that tone you finally nailed.
We have designed the Creamer reverb to be dead simple to operate, but with just enough room for tweaking, so you don´t feel limited in your search for the sonic equivalent of Grand Canyon or that small room we frequently visit every day.
Madrigal Guitars in collaboration with Alfredo Gonzalez Luthier offers to the professional guitarists these 100% Handmade classical guitars concert models .
Each guitar is made separately with an exhaustive selection of exclusive and exotics woods and highly musical especiality.
The playing guitarist will achive Powerful attack, unique lyrical and sensitive timbre, with a wide spectrum sound between piano and forte that the professional musician will appreciate.
All the guitars are shellac finished.
MAGNOLIA-PROFESSIONAL
Top:Cedar
Neck:Cedar reinforce
Back & Sides:Indian Rosewood Solid
Fingerboard:Ebony
Bridge: Indian Rosewood
Frets: 21
Finish: French Laque
Inc exelent Case
This trolley was specifically designed to perfectly accommodate the organs of the Legend line. it is compatible with both the Legend and the Legend Soul 273.
Thanks to its reinforced corners and internal padding, it allows you to safely transport your instrument for any need; in addition to facilitating transportation thanks to the wheels located on one side of the trolley.
SPECIFICATIONS
External Dimensions (WxHxD): cm 130,5 x 65 x 26 / 51,38″ x 25,59″ x 10,23″
Internal Dimensions (WxHxD): cm 117,5x 59 x 200 / 46,26″ x 23,22″ x 7,87″
Weight: Kg 10,70 / Lbs 23,59
System Type 2-way bass reflex speaker
Max SPL (@1m) 127 dB
Frequency Response (-10 dB) 61 Hz - 20 kHz
HF 1.35" driver
LF 10” - 2” V.C
Dispersion (HxV) 90° x 70°
Crossover Frequency 1780 Hz
Peak Power 400 W
Cooling Fan
DSP 28/56 bit
Advanced Functions FIR Filters
Connectors I/O CH1: Combo, CH2: XLR-F + 6.35 mm jack (1/4”), LINE OUT: XLR-M
Controls Channel level, MAIN level, PRESET, Channel 1 sensitivity, LINK/MIX output
Cabinet Multilayer wood with polyurea finish
Dimensions (W x H x D) 304 x 505 x 305 mm (11.9" x 19.9" x 12")
Weight 12.7 kg (28 lbs)
Revolutionary Sound Engine
At the core of the Legend One series is the Legend Soul Engine, powered by Viscount's proprietary TMT (Tonewheel Modeling Technology) and HDS (High-Definition Sampling). These technologies provide authentic organ tones, including detailed recreations of iconic models such as the B3 (1938), C3 (1955), A100 (1961), and more. The 91 tonewheels offer rich polyphony and realistic harmonic detail, capturing the essence of classic tonewheel organs.See more Info
1-EFFEKT PEDALER
-t.jpg)
