Cyclemic
Cyclemic Behind the head sweat resistant fitness microphone.
Cyclemic is the superior headworn-microphone designed specifically for the fitness industry’s indoor cycling programs. Cyclemic’s sleek orange boom arm with ‘J’ curve design is easy to spot on the most well known cycling presenters and instructors worldwide. It’s unique miniature mic capsule is designed to be worn beside the mouth, not in front. Breath noises are not over-amplified; no foam ball windscreen is needed. Cyclemic’s excellent sound quality ensures clear voice projection, taking the stress and strain off instructors voices when teaching high-sweat cycling classes.
NYHED!
FLORIDA BAR II light stand RGB LED and FX projectors set
4-in-1 floor-standing LED spotlights
BESKRIVELSE SPECIFIKATION
- Light sources :
* PAR effect x2: 3 x 9W RGB LEDs
* Derby effect x2: 3 x 3W RGB LEDs
* Strobe effect: 4 x 1W white LEDs
* Laser effect: green 30mW / 532nm and red 100mW / 650nm
- Class 3B laser with security key and interlock connector
- Modes: Auto, Musical, Master/Slave and DMX
- Number of DMX channels: 3, 5, 9 or 27
- DMX input/output: XLR 3-pin
- Display: digital screen with 4 control buttons
- Chassis: steel and plastic
- Supply voltage: 100-240V 50/60 Hz
- Power consumption: 45W
- Weight: 6.6kg
- Protection rating: IP20 (indoor use)
- Inluded : power cable and Velcro fastener, tripod, IR remote control, carrying case
- Tripod: height-adjustable from 1.5m to 2.5m
System Type 2-way bass reflex speaker
Max SPL (@1m) 125 dB
Frequency Response (-10 dB) 63 Hz - 20 kHz
HF 1.35" driver
LF 8” - 2” V.C
Dispersion (HxV) 90° x 70°
Crossover Frequency 1800 Hz
Peak Power 400 W
Cooling Fan
DSP 28/56 bit
Advanced Functions FIR Filters
Connectors I/O CH1: Combo, CH2: XLR-F + 6.35 mm jack (1/4”), LINE OUT: XLR-M
Controls Channel level, MAIN level, PRESET, Channel 1 sensitivity, LINK/MIX output
Cabinet Multilayer wood with polyurea finish
Dimensions (W x H x D) 264 x 440 x 260 mm (10.4" x 17.3" x 10.3")
Weight 10.9 kg (24 lbs)
T-REX REPLICA - DELAY
THE ORIGINAL COLLECTION
T-Rex Effects is proud to announce that the legendary Replica Delay is back with an even larger and more powerful “engine”, but still delivers the same iconic sound and simplicity.
The Replica is built with high-quality European components and Danish craftsmanship; we are happy to say that we have achieved a new level.
You will discover two different modes, ¨Vintage mode¨, where the repeats are passed through a compressor/expander circuit, which makes the sound smooth and dynamic.
This circuit was used in the first generation of the Replica.
Den talentfulde italienske designer Pagelli har arbejdet tæt sammen med Burns® London for at skabe et unikt nyt design. Den nye Jet-Sonic® oser moderne retro chic med smukke kurver og en virkelig individuel stil. Alle komponenter og materialer, der er brugt, er af høj kvalitet. Burns® er kendt for, og vores musikere er kommet til at forvente. Lyden er virkelig ude af denne verden - vi tror, at Jet-Sonic ™ skal flyve
Transporttaske og vogn
Til Viscount Legend Live og Legend Soul 261 orgel
Med forstærkede kanter og indvendig polstring
Håndtag
To rummelige sidelommer
Indvendige mål (B x H x D): 101 x 59 x 20 cm
Udvendige mål (B x H x D): 114 x 65 x 26 cm
Vægt: 10,3 kg
2 MUDHONEYS IN 1 - DUAL DISTORTION
If you still haven’t heard a T-Rex Mudhoney, do yourself a favour and plug one in next time you’re at the music store.
Dirty and sweet, this classic dual distortion pedal has been praised for its amazing tonal range and ability to deliver everything from a smooth dirty edge to a harrowing wall of distorted sound. It’s one of first pedals we produced, and it set the standard for many T-Rex pedals to come.
Everything that is great about the original Mudhoney – and then doubles it! With two channels of vintage gain, you can easily switch between a clean sound from your amp, a nice edgy overdrive from the one Mudhoney channel and a thick warm distortion from the other channel – delivering deliciously dirty T-Rex tone all the way.
Mikrofon kabel 6,0 meter XLR - XLR
99% pure Oxigen Free Copper (OFC), totally noiseless thanks to an internal semi-conductive PVC jacket
Audio signal cable with spiral > 94% coverage shield
Low capacitance: 85 pF/m It grants a clean and bright sound that is accurate to its source and high mechanical strenght while having a soft cable
Extremely sturdy: PVC and vulcanised silicone external coating for a maximum flexibility and a long durability
Resin injection to protect internal connections for an eternal duration
Vanguard catchy design
Hybrid connectors: mix between die-cast plastic body and chrome metal body for an exceptional robustness
Active high-performance column PA system
1" Compression driver with CD horn
6x 3" Centre speaker
10" Long excursion sub-woofer
Power: 2000 Watt
Class D power amplifier
Maximum level: 126 dB Peak
Frequency response +/- 10 dB: 38 - 20,000 Hz
Horn characteristic: 120° x 30°
24-Bit DSP with storable 5 User Presets: Mode, Master EQ,Delay, Display, Bluetooth
Modes: 3 Basic settings for Music, Voice and DJ
System delay adjustable
Illuminated LC display
4 Channel mixer
2 Switchable mic/line inputs: XLR/jack combo
1 HiZ instrument input
1 RCA stereo input
1 XLR mix output
Bluetooth 5.0 for audio streaming
Variable column construction with or without spacer element
Sub-woofer cabinet made of birch/multiplex wood
Bass dimensions (W x H x D): 36.6 x 62.5 x 54.1 cm
Bass weight: 21 kg
Dimensions of top/spacer (W x H x D): 10.8 x 82.5 x 9.8 cm
Weight of top: 3.9 kg
Weight of spacer: 2 kg
Total height: 2.13 m
Total weight 26.9 kg
Double internal memory (2GB)
2 Completely redesigned acoustic piano sample sets
Updated all existing piano models
Expanded tonal possibilities with the dual DSP of the Legend ’70s MKII
Backward compatibility with MKI Legend ’70s
The new acoustic piano module is here. Completely updated with twice memory and processing power to maximize the realistic feel when you play.
Available for Legend ’70s MKII, but also backward compatible with MKI.
For stage applications
Linear frequency response
Excellent feedback resistance
Polar pattern: Cardioid
Frequency range: 20 - 20,000 Hz
Sensitivity: 5.6 mV/Pa
Peak SPL: 150 dB
Impedance: 200 Ohm
Current consumption: 4 mA
Requires 48 V phantom power
Black metal housingDouble bearing capsule suspension
Dimensions: 185 x 51 mm
Weight: 312 g
SA61 microphone holder and bag included
The Mellotron Micro is the smallest version available of the M4000D Digital Mellotron, and includes many of the features of the full-size version. It includes one hundred 24-bit uncompressed sounds sourced from original first-generation Mellotron and Chamberlin tape libraries. Sound Card 01 is the built-in library for the M4000D series of instruments.
Tanglewood TU3TLCESB Thinline Folk Hybird Cutaway, Spruce Top Mahogany Back and Sides with Tanglewood TEQ QX EQ System Vintage Sunburst Satin
TU3, er en Thinline akustisk/elektrisk guitar. Den føles som en elektrisk guitar, men lyder helt rigtig til dig, som gerne vil spille akustisk, uden feedbackproblemer. Udført i lækker Satin finish, med pickup system under sadlen, som kontrolleres via Belcat EQ systemet. Et helt simpelt Volume/Bass/Treble layout, hvor du kan ”gemme” kontrollerne, når du har indstillet din lyd. Gode krom mekanikker, m/matsorte knapper, samt selvfølgelig batterilåge på bagsiden. En smuk og kompakt guitar !
1200 W PEAK POWER
600 W RMS POWER
NEWLY DESIGNED ASYMMETRICAL HORN
ADVANCED DSP WITH FIR FILTERS
2 INPUT CHANNELS (MIC-LINE/MIC-INSTR)
SELECTABLE OUTPUT CHANNEL (LINK CH1/MIX CH 1+2)
8 EQ PRESETS
FRESH FULL GRILLE DESIGN
STAGE MONITOR USE
Technical Data
Speaker Type: 2-Way Active Speaker
Acoustical data
Frequency Response [-10dB]: 58 – 20.000 Hz
Frequency Response [- 3dB]: 70 – 19.600 Hz
Max SPL: 128 dB
HF: 1″ Exit, 1.4 v.c.
Type HF: Compression driver
Horizontal Directivity: 100° (85° up/120° down)
Vertical Directivity: 85° (+ 25°/-60°)
Horn: Asymmetrical Horn
LF: 10″, 2″ v.c.
.REPLICATOR D’LUXE TAPE ECHO
The Replicator D’Luxe is a sum up from all the knowledge, we have built up over the years, making Tape delays.
It is a 2 head machine. The drive mechanism has been updated with a noiseless belt drive. A tape lock/release mechanism is added, to make the pinch wheel and tape last longer and electronics has been tuned to perfection.
"Some guitarists think of the USA as the only source of quality electric guitars, and for the most part they are correct. However, there are many of us who remember the superb range of guitars designed and made by BURNS GUITARS, a British company.
Ser.No: 06
Finally, a professional string dampener / muting accessory that every studio, session player, and tapping aficionado should have! Slide on a FretWrap to effectively cut overtones and sympathetic resonance during recording, live performance, two-hand tapping, or any creative situation where you need that extra muting hand for cleaner takes without the unwanted string noise or ringing. The adjustable strap lets you fine-tune the pressure and dampening of the strings. Quickly slides over the headstock when not in use. No special guitar modification, installation, or tools required - Yet amazingly effective!
SM - Fits 4-string basses, 6-string electric and acoustic guitars, and ukeleles
MD - Fits 5-string basses & 6-string classical guitars
LG - Fits 6-string basses & 7- to 8-string guitars
XL - Fits 8- to 12-string basses, Chapman Sticks, double basses & other extended range guitars
It’s not easy to reinvent forgotten technology, but after many years of research, we found the lost secrets and brought back the authentic echoes from the 1950s. It’s known for its use in David Gilmour and Hank Marvin’s guitar tones, John Bonham even used it on drums!
The Binson Echorec provides a unique and distinguishing type of echo supplied by a rotating metal drum where the audio signal is recorded through a magnetic recording head. The Four Playback heads will allow you to choose individual echoes and swells.
BINSON ECHOREC REBORN BY T-REX EFFECTS DENMARK
LEGEND SOUL ORGANS
Legend Soul line is born thanks to the Viscount centennial experience in projecting and making instruments. Our purpose was creating new digital tonewheels organs able to reproduce the original and iconic 9 contacts effect as much realistic as possible. After several studies, our engineers have managed to perfectly recreate all of them, using a unique technology patented by us. Thanks to that, when you play one of our Legend Soul, you will feel the iconic and realistic sounds of original tonewheels organ, but with all the advantages of the digital ones.
The M4000D Mini Mellotron was developed to meet the needs of keyboardists who want an even smaller and lighter Digital Mellotron. The Mini is also designed to fit perfectly on top of the regular M4000D to make a great looking dual manual Mellotron. Instead of the M4000D’s wooden keyboard, it includes a high-quality, semi-weighted Fatar piano-style keyboard with velocity sensitivity, and mono aftertouch.
Madrigal Guitars in collaboration with Alfredo Gonzalez Luthier offers to the professional guitarists these 100% Handmade classical guitars concert models .
Each guitar is made separately with an exhaustive selection of exclusive and exotics woods and highly musical especiality.
The playing guitarist will achive Powerful attack, unique lyrical and sensitive timbre, with a wide spectrum sound between piano and forte that the professional musician will appreciate.
All the guitars are shellac finished.
MAGNOLIA-PROFESSIONAL
Top:Cedar
Neck:Cedar reinforce
Back & Sides:Indian Rosewood Solid
Fingerboard:Ebony
Bridge: Indian Rosewood
Frets: 21
Finish: French Laque
Inc exelent Case
PN PURE NICKEL ELECTRIC, " Warm and Vintage tone" ! Pure nickel is an alternative to the brighter tone of nickel-plated.
In 50` it was the primary strings alloy. These strings provide a warm and vintage sound perfect for traditional blues,classic rock,rockabilly and more.....
The Galli Musical Strings Company was established by Tommaso Galli in 1890. At that time musical strings were handcrafted using gut.
In 1950 Roberto Galli, Tommaso’s son, joined the firm. Roberto inherited the talent of his father and in time became like his father a great expert, a maestro, in the art of musical string making.
In the 1970s Galli Strings introduced new technologically advanced equipment into their production process. Roberto Galli’s son, Tommaso, joined the company in 1985. Building on his grandfather’s and father’s musical and technical achievements, Tommaso Galli has extended into the twenty-first century the Galli tradition of developing and manufacturing fine musical strings.
1-EFFEKT PEDALER
-t.jpg)
-t.jpg)
