PX1
PX1 is a multifunctional foldable music stand. Thanks to its particular design, the product is stable in any position of its use. The board can be removed and folded. This part is made of shock-resistant but flexible ABS, so that to avoid damages due to accidental falls. PX1 Music Stand is equipped with a storage compartment and two retractable holders to hang headphone and violin, cello or double bass bow. Useful also for any other proper use. In case of large music sheets, board extensions named PX1A are available as separate and optional accessories. The extensions are to be connected on the board lateral rails.
Inc. Bag
Active high-performance column PA system
1" Compression driver with CD horn
6x 3" Centre speaker
10" Long excursion sub-woofer
Power: 2000 Watt
Class D power amplifier
Maximum level: 126 dB Peak
Frequency response +/- 10 dB: 38 - 20,000 Hz
Horn characteristic: 120° x 30°
24-Bit DSP with storable 5 User Presets: Mode, Master EQ,Delay, Display, Bluetooth
Modes: 3 Basic settings for Music, Voice and DJ
System delay adjustable
Illuminated LC display
4 Channel mixer
2 Switchable mic/line inputs: XLR/jack combo
1 HiZ instrument input
1 RCA stereo input
1 XLR mix output
Bluetooth 5.0 for audio streaming
Variable column construction with or without spacer element
Sub-woofer cabinet made of birch/multiplex wood
Bass dimensions (W x H x D): 36.6 x 62.5 x 54.1 cm
Bass weight: 21 kg
Dimensions of top/spacer (W x H x D): 10.8 x 82.5 x 9.8 cm
Weight of top: 3.9 kg
Weight of spacer: 2 kg
Total height: 2.13 m
Total weight 26.9 kg
System Type 2-way bass reflex speaker
Max SPL (@1m) 125 dB
Frequency Response (-10 dB) 63 Hz - 20 kHz
HF 1.35" driver
LF 8” - 2” V.C
Dispersion (HxV) 90° x 70°
Crossover Frequency 1800 Hz
Peak Power 400 W
Cooling Fan
DSP 28/56 bit
Advanced Functions FIR Filters
Connectors I/O CH1: Combo, CH2: XLR-F + 6.35 mm jack (1/4”), LINE OUT: XLR-M
Controls Channel level, MAIN level, PRESET, Channel 1 sensitivity, LINK/MIX output
Cabinet Multilayer wood with polyurea finish
Dimensions (W x H x D) 264 x 440 x 260 mm (10.4" x 17.3" x 10.3")
Weight 10.9 kg (24 lbs)
SPIN-TONE 700
The Spin-Tone amplifiers incorporate an hybrid system with a rotating horn in the upper part and powerful woofers in the lower; a unique Rotary speakers line dedicated to the organist’s needs!
Type 3 ways 3 amplifiers (2 speakers with woofer and tweeter for rotary effect or stationary + rotating driver)
Power (W) Lower 300W + 300W (L+R) - Upper 150W
Max SPL calculated (dB) 127
Crossover Frequency 1.2 Khz
Subsonic filter Yes
HF Protection compressor, short circuit, thermal
PC Control Yes
Connections 3 pins IEC 250 VAC, 2x balanced input jacks, jack pedal, USB B TYpe, MIDI IN, UNDECAL 11 pin connector
Controls Pedal input gain, Volume, Equalizer (bass - mid gain - mid frequency - treble), 11 pin input sensitivity, FACTORY RESET, rotative presets selector
Speakers 2x10" Woofer, PA Driver with rotating horn
Cabinet Plywood ...........m.m. Se Info
Features
600 W RMS Class D AMP
Selectable Stereo Balanced Input
Link or Xover Balanced Stereo Output Mode
Compact and sturdy wood cabinet
Lightweight
Polarity Switch
FLAT or BOOST Mode Switch
Technical Data
Speaker Type: Active Subwoofer
Acoustical data
Frequency Response [-10dB]: 42 – 124 Hz
Max SPL (1 m): 131 dB
Directivity: omnidirectional
LF: 15″
LF Voice Coil: 2.5″
Amplifier
Amp Technology: SMSP digital amplifier
Amp Class: Class D
RMS Power: 600 W
Peak Power: 1200 W
Processor
Controller: 28/56 bit DSP
Limiter: Peak, Thermal, RMS
Controls: Subwoofer level, Outputs mode, Polarity, Subwoofer mode
Input
Signal Input: 2x XLR (balanced)
Signal Output: 2x XLR (balanced)
Mechanics
Housing: Plywood
Grille: Full metal grid
Pole Mount: M20
Width: 430 mm (16.92 in)
Height: 580 mm (22.83 in)
Depth: 600 mm (23.62 in)
Weight: 25.5 kg (56.22 lbs)
T-REX REPLICA - DELAY
THE ORIGINAL COLLECTION
T-Rex Effects is proud to announce that the legendary Replica Delay is back with an even larger and more powerful “engine”, but still delivers the same iconic sound and simplicity.
The Replica is built with high-quality European components and Danish craftsmanship; we are happy to say that we have achieved a new level.
You will discover two different modes, ¨Vintage mode¨, where the repeats are passed through a compressor/expander circuit, which makes the sound smooth and dynamic.
This circuit was used in the first generation of the Replica.
Revolutionary Sound Engine
At the core of the Legend One series is the Legend Soul Engine, powered by Viscount's proprietary TMT (Tonewheel Modeling Technology) and HDS (High-Definition Sampling). These technologies provide authentic organ tones, including detailed recreations of iconic models such as the B3 (1938), C3 (1955), A100 (1961), and more. The 91 tonewheels offer rich polyphony and realistic harmonic detail, capturing the essence of classic tonewheel organs.See more Info
The Sunrise has quickly become our best selling model. The pronounced "Wings" combine with a sharp tip — this versatile guitar pick will destroy your current injection-molded pick/plectrum. The added width created by the Wings provides increased grip and security when held in the playing position of your picking hand.
Hand-Shaped And Polished By Professionals To Bring You A Quality Product That Cannot Be Matched At This Price Point.
Superior Grip From A High-Grade Transparent Thermoplastic (Polymethyl Methacrylate).
Instant Tone Improvement.
Play Faster And Louder With Our Unique Material And Bevel Design.
Proprietary Beveling System To Give The Most Consistent Bevels Possible.
Lasts Much Longer Than A Regular Pick.
Double internal memory (2GB)
2 Completely redesigned acoustic piano sample sets
Updated all existing piano models
Expanded tonal possibilities with the dual DSP of the Legend ’70s MKII
Backward compatibility with MKI Legend ’70s
The new acoustic piano module is here. Completely updated with twice memory and processing power to maximize the realistic feel when you play.
Available for Legend ’70s MKII, but also backward compatible with MKI.
The Legend LM 73 lower manual is the perfect addition to your Legend ONE keyboard, offering a second manual dedicated to the following features:
The most compact dual manual organ with two sets of drawbars.
The removable half-moon switch on the Legend LM eases the rotary control.
If you’re feeling asymmetrical today, why not combine your Legend ONE 61 with a 73 base?
Transform your all-in-one keyboard into an all-in-one dual organ with high performance and compact dimensions and price.
What's In The Box
1 x f5 Snare Microphone
3 x f2 Rack and Floor Tom Microphones
1 x f6 Kick Drum Microphone
2 x f9 Overheads Microphones
6 x DCLIP Microphone Clips
4 x DFLEX Microphone Clips
1 x MC1 Microphone Clip
Aluminum Road Case
A single module for two synths! The FM Module for Legend ’70s gives you two layers of authentic FM synthesis and a selection of sounds from music history.
You can import DX-TX sounds from the available libraries. You will also have an FM synthesis editor to experiment with!
FM SYNTH MODULE
2 Layers of Stereo FM Synthesis totally independent
6 Operators
LFO and Pitch Envelope exactly as in the historical formulation of FM synthesis
Iconic Sounds of the Decades
Compatibility with DX-TX sounds from the libraries available
SEE MORE INFO
Finally, a professional string dampener / muting accessory that every studio, session player, and tapping aficionado should have! Slide on a FretWrap to effectively cut overtones and sympathetic resonance during recording, live performance, two-hand tapping, or any creative situation where you need that extra muting hand for cleaner takes without the unwanted string noise or ringing. The adjustable strap lets you fine-tune the pressure and dampening of the strings. Quickly slides over the headstock when not in use. No special guitar modification, installation, or tools required - Yet amazingly effective!
SM - Fits 4-string basses, 6-string electric and acoustic guitars, and ukeleles
MD - Fits 5-string basses & 6-string classical guitars
LG - Fits 6-string basses & 7- to 8-string guitars
XL - Fits 8- to 12-string basses, Chapman Sticks, double basses & other extended range guitars
NYHED!
FLORIDA BAR II light stand RGB LED and FX projectors set
4-in-1 floor-standing LED spotlights
BESKRIVELSE SPECIFIKATION
- Light sources :
* PAR effect x2: 3 x 9W RGB LEDs
* Derby effect x2: 3 x 3W RGB LEDs
* Strobe effect: 4 x 1W white LEDs
* Laser effect: green 30mW / 532nm and red 100mW / 650nm
- Class 3B laser with security key and interlock connector
- Modes: Auto, Musical, Master/Slave and DMX
- Number of DMX channels: 3, 5, 9 or 27
- DMX input/output: XLR 3-pin
- Display: digital screen with 4 control buttons
- Chassis: steel and plastic
- Supply voltage: 100-240V 50/60 Hz
- Power consumption: 45W
- Weight: 6.6kg
- Protection rating: IP20 (indoor use)
- Inluded : power cable and Velcro fastener, tripod, IR remote control, carrying case
- Tripod: height-adjustable from 1.5m to 2.5m
Enredo Comienzo serien fra Tanglewood, er fine klassiske guitarer i en yderst fornuftig prisklasse.
Grandæk, samt Ryg og Sider i Lindetræ i mat Satin finish.
Guitarerne har Techwood gribebræt, og gode mekanikker. Et virkeligt godt valg til skoler, begyndere, osv. som vil starte i en god kvalitet
Guitarerne findes i 4/4 størrelse
Tribute L-2000
Leos L serie basser, startede som en videreførelse af hans Music Man designs, og med to Humbucker pickups tilbød G&L noget på det tidspunkt, som ikke fandtes hos MM. L serien har siden starten fået sit eget liv, og både L-2000, og L-2500 (5 str) er blevet manges favorit bas, og i høj grad en bestseller i Tribute serien.
G&L er Leo Fenders sidste livsværk, skabt på erfaringerne fra Fender og Music Man, og designet i Leo’s workshop, på Fender Avenue 2548, i Fullerton, CA. Stedet hvor de første Music Mans blev bygget, og siden alle G&L USA modeller. Den lille fabrik kører stadig på højtryk, og Leo’s værksted står, som da han forlod det. Tradition og håndværk forenet. Tribute serien er fremstillet hos Cortek i Indonesien, og anvender G&L pickups og hardware!
NAMED AFTER DANISH GUITARIST KNUD MØLLER
T-Rex Møller 2 delivers the same classic overdrive that made it's predecessor one of T-Rex’s most sought-after pedals. Named after Danish guitarist Knud Møller, for whom the original pedal was designed, Møller 2 features a more durable “Bass Boost” toggle switch and easier-to-read control knob graphics. The pedal is armed with a 0-20 db clean boost, as well as a mix control which lets you dial in the perfect balance between distorted and clean signals. Rolled all the way up and with distortion maxed, the pedal sounds just like a vintage tube amp at full volume. Roll the Mix knob back a bit, and your clean signal starts to get through; if you pick lightly or roll back your guitar volume, you get a stunning clean, softly-clipping sound that retains all the feel and dynamics of your original tone, only bigger, louder and richer. The boost function lets you dial in a solo level, whether the overdrive circuit is activated or not.
A New Dimension of Sound and Space in a Majestic Console caracterized by unsurpassed elegance and refinement : this is the Ouverture 355.
Mastercrafted French Terraced Console,
AcuSphere dimensional reverb – recreates the acoustics of large cathedrals and concert halls with stunning realism,
Enhanced 10.2 Surround System – experience a fully immersive sound field through 14 speakers,
Comprehensive Internal Library Of Organ
Stops ,
DANTE Audio Over Ethernet (option).
The design of the Ouverture line was inspired by the beautiful terraced consoles built by Aristide Cavaille-Coll, the renowned French organ builder of the nineteenth century.
Extensible arm microphone stand. Adjustable elevation arm and professional knob for the height fastening equipped with fixed desktop stand. Suggested for radio installations and dubbing studios.
Maximum Height 100 cm.
Weight1,2 Kg.
Maximum Carriage Capacity1,8 Kg.
Total Volume 0,068 cbm.
Color Black
Material of Construction steel
99% pure Oxigen Free Copper (OFC), totally noiseless thanks to an internal semi-conductive PVC jacket
Audio signal cable with spiral > 94% coverage shield
Low capacitance: 85 pF/m It grants a clean and bright sound that is accurate to its source and high mechanical strenght while having a soft cable
Extremely sturdy: PVC and vulcanised silicone external coating for a maximum flexibility and a long durability
Resin injection to protect internal connections for an eternal duration
Vanguard catchy design
Hybrid connectors: mix between die-cast plastic body and chrome metal body for an exceptional robustness
Transporttaske og vogn
Til Viscount Legend og Legend Soul 273 orgel
Med forstærkede kanter og indvendig polstring
Håndtag
To rummelige sidelommer
Indvendige mål (B x H x D): 117,5 x 59 x 20 cm
Udvendige mål (B x H x D): 130,5 x 65 x 26 cm
Vægt: 10,7 kg
MUDHONEY DISTORTION - THE ORIGINAL COLLECTION
The Mudhoney distortion was our first shot at making a great, all-round distortion box. That´s how most owners have described it - it just plain works for a lot of different music styles and they haven´t found a similar sound in many other pedals. In fact, there´s a story about a player that bought and sold six Mudhoney´s, before realizing that the pedals he replaced it with weren´t doing it for him, so he got the seventh one – and kept it.
Transporttaske og vogn
Til Viscount Legend Live og Legend Soul 261 orgel
Med forstærkede kanter og indvendig polstring
Håndtag
To rummelige sidelommer
Indvendige mål (B x H x D): 101 x 59 x 20 cm
Udvendige mål (B x H x D): 114 x 65 x 26 cm
Vægt: 10,3 kg
Strings in black nylon tape wound on a stainless steel core: if used on a fretless electro-acoustic bass, make the instrument able to produce tones as a double bass. 5 strings
Legend Live orgel, der perfekt kan genskabe lyden af tonehjul orgler. Det tilbyder dig igen den "vintage følelse". Med fire sæt drawbars og dobbelt tastaturer, står dette orgel noget for sig selv i det avancerede teknologiske lyde og sansen af den gamle klang. Hvert aspekt af et tonehjul tastatur og lyd er så perfekt dupliceret, at spillere over hele verden siger: "Det er det bedste nogensinde”!
The Winterleaf Exotic TWX4CEK guitar is a masterfully crafted instrument that combines breathtaking aesthetics with exceptional acoustic-electric capabilities. Designed for discerning musicians, this guitar offers a harmonious blend of striking visual appeal and superior sound quality.
The Super Folk body shape of the TWX4CEK guitar is a work of art in itself. It presents a harmonious balance between the grand auditorium and folk body styles, resulting in an elegant and ergonomic design. This body shape boasts a slightly more compact and comfortable form, making it an ideal choice for players seeking both comfort and versatility. It fits snugly in your arms and offers an excellent projection of sound, making it suitable for a wide range of playing styles.
Range: Winerleaf Exotic
SEE INFO
Body Shape: Super Folk Cutaway
Top: Solid Mahogany, Koa Veneer
Back: Koa
Sides: Koa
Fingerboard: Eboncore
Electronics: Tanglewood Premium Plus
Finish: Autumn Burst Gloss
Active Column PA System
2000 W Class D power amplifier
Max. SPL (sound pressure level): 127 dB
Frequency response: +/- 10 dB, 35 - 20,000 Hz
Horn characteristics: 120° x 30°
1" Compression driver with CD horn
6x 3" Midrange speakers
12" Bass speaker in the subwoofer
Various possibilities for setting up the column system by removing or implementing the spacer
4-Channel mixer
24-Bit DSP with 5 storable user presets (Mode, Master EQ, Delay, Display, Bluetooth)
3 Sound modes: Music, Voice, DJ
Adjustable system delay
Backlit LCD display
2 Switchable mic/line inputs: XLR/jack combo
1 Hi-Z Instrument input: Jack
1 Stereo input: RCA
1 Mix output: XLR
Bluetooth 5.0 for audio streaming
Subwoofer housing is made of birch/plywood
Bass dimensions (W x H x D): 36.6 x 67.5 x 54.1 cm
Bass weight: 22.1 kg
Top/Spacer dimensions (W x H x D): 10.8 x 82.5 x 9.8 cm
Weight of the top: 3.9 kg
Spacer weight : 2 kg
Total height: 2.18 m
Total weight: 28 kg
1-EFFEKT PEDALER
