T-REX REPLICA - DELAY
THE ORIGINAL COLLECTION
T-Rex Effects is proud to announce that the legendary Replica Delay is back with an even larger and more powerful “engine”, but still delivers the same iconic sound and simplicity.
The Replica is built with high-quality European components and Danish craftsmanship; we are happy to say that we have achieved a new level.
You will discover two different modes, ¨Vintage mode¨, where the repeats are passed through a compressor/expander circuit, which makes the sound smooth and dynamic.
This circuit was used in the first generation of the Replica.
Gold-plated 1" capsule stored in miniature lyre from Rycote
Black metal housing with scratch-resistant ceramic coating
Extremely low intrinsic noise (4.5 dBA)
Polar pattern: Cardioid
Frequency range: 20 - 20000 Hz
Output impedance: 100 ohms
Sensitivity: 35.0 mV / Pa
Equivalent noise level: 4.5 dBA (according to IEC651), Max
Output level: +8.0 dBu (1 kHz, 1% THD, 1 kOhm load)
Dynamic range: 128 dB
Max. sound pressure level: 132 dB
Signal-to-noise ratio: 90 dBA (according to IEC651)
Requires 24 V / 48 V phantom power
Connection: 3-pin XLR
Dimensions (diameter x length): 50 x 190 mm
Weight: 395 g
Includes deluxe shockmount SM6 with integrated pop protection, XLR microphone cable (6 m) and dust protection bag
Made in Australia
‘The British Sound’
Formidable weaponry
It was the Who’s John Entwistle who first traded in his Marshall stacks in favour of Sound City at the beginning of 1967, and Pete Townshend followed later that year.
At this time, Dave Reeves was providing Sound City with the amplifiers, OEM. They were the first in a lineage of amplifiers that would quickly evolve into Hiwatt.
Also, around this time, Jimi Hendrix and his manager Chas Chandler approached Townshend, asking for his opinion on amplification. He told them that he had stopped using Marshall, as he thought Sound City were better. The Jimi Hendrix Experience subsequentlystarted using Sound City rigs, but set them up together with their Marshall stacks instead of replacing them.
In late 1968, The Who approached Dallas Arbiter, the makers of Sound City, asking if their equipment could be modified slightly. This request was denied, but independent amp designer and manufacturer Dave Reeves agreed, and created customised L100 amplifier
Active Near Field Monitor
Equipment: 5" Woofer and 1" tweeter
2-Way class-D amplifier 82 watts - 41 watts woofer and 41 watts tweeter
Frequency response (+/- 3dB): 49 - 20,000 Hz
Maximum level: 108 dB
Input sensitivity adjustable +4 dBu / -10 dB
Boundary EQ
HF trim switch
Line input XLR and 6.3 mm jack balanced
15 mm MDF housing
Dimensions (HxWxD): 298 x 185 x 231 mm
Weight: 4.73 kg
Price per piece
Legend Exp
If you want the fabulous Legend sound powered by the physical TMT modeling technology, Legend Exp module is the perfect solution for you.
The control panel offers a wide range of buttons and knobs including a series of drawbars that allow you to fully control in real time the extensive features offered by the instrument.
Tilslut din guitar til Scarlett Solos hi-Z instrumentindgang, den føles ligesom en forstærker. Tilslut en mikrofon til Solo's mikrofonforforstærker, og det lyder fantastisk med det samme. Scarlett bringer Focusrites professionelle lydkvalitet, uanset hvor du laver din musik.
DuoStrap Neo
Proven comfort. At a more comfortable price.
This is what you've been waiting for: The DuoStrap Neo is our answer to the search for the most comfortable, ergonomically-correct, AND affordable guitar and bass strap. Endorsed by professionals including Dr. Randall Kertz, renowned chiropractor and physician, the DuoStrap's patent-pending balanced weight distribution offers unmatched comfort like its Signature counterpart, thoughtfully constructed with synthetic materials! Significantly reduces shoulder pain and strain while keeping a natural and comfortable playing position.
The DuoStrap Neo comes in all-black 3.25" wide soft-rolled neoprene, with lengths adjustable from 33" to 44" and an extra-long option that brings the total usable length to 51".
What's In The Box
1 x f5 Snare Microphone
3 x f2 Rack and Floor Tom Microphones
1 x f6 Kick Drum Microphone
2 x f9 Overheads Microphones
6 x DCLIP Microphone Clips
4 x DFLEX Microphone Clips
1 x MC1 Microphone Clip
Aluminum Road Case
BAG0CG – Soft bag for classic guitar
Soft bag for classic guitar. Made of rip-proof “Oxford cloth 600D” with cloth outer border. Velcro reinforced easy-to-open handle. Adjustable double strap. Large frontal pocket. Strong zippers stitched with anti-rip nylon. Black color.
The Winterleaf Exotic TWX4CEK guitar is a masterfully crafted instrument that combines breathtaking aesthetics with exceptional acoustic-electric capabilities. Designed for discerning musicians, this guitar offers a harmonious blend of striking visual appeal and superior sound quality.
The Super Folk body shape of the TWX4CEK guitar is a work of art in itself. It presents a harmonious balance between the grand auditorium and folk body styles, resulting in an elegant and ergonomic design. This body shape boasts a slightly more compact and comfortable form, making it an ideal choice for players seeking both comfort and versatility. It fits snugly in your arms and offers an excellent projection of sound, making it suitable for a wide range of playing styles.
Range: Winerleaf Exotic
SEE INFO
Body Shape: Super Folk Cutaway
Top: Solid Mahogany, Koa Veneer
Back: Koa
Sides: Koa
Fingerboard: Eboncore
Electronics: Tanglewood Premium Plus
Finish: Autumn Burst Gloss
A little over 40 years ago, largely because we could not afford to buy a high quality electric guitar, and partly because we enjoyed a challenge, my Dad and I decided to make an electric guitar. I designed an instrument from scratch, with the intention that it would have a capability beyond anything that was out there, more tunable, with a greater range of pitches and sounds, with a better tremolo, and with a capability of feeding back through the air in a "good" way - i.e. in a self-sustaining mode.
Se info
This guitar are with Brian May`s signature (autograf )
BESKRIVELSE SPECIFIKATION
The PARWASH 730 QUAD developed by Algam Lighting is a must-have for any event or light show. This LED PAR is capable of generating a powerful light flow thanks to its 7 X 30W LEDs combined with 25° aperture optics, while generating rich, vibrant colors with its RGB+WW (Warm White) color palette. Ideal for a wide range of applications, the PARWASH 730 QUAD features professional connectivity with 3-point DMX input/output for precise control of the machine and chaining with another PARWASH 730 QUAD. To ensure safe operation, this Par Wash is equipped with a PowerCon locking electrical connector to prevent unintentional disconnection, plus a PowerCon output for powering another PARWASH 730 QUAD. This high-performance machine is actively cooled to guarantee optimal operating conditions, whether on the floor or hanging from a double bracket.
NYHED!
FLORIDA BAR II light stand RGB LED and FX projectors set
4-in-1 floor-standing LED spotlights
BESKRIVELSE SPECIFIKATION
- Light sources :
* PAR effect x2: 3 x 9W RGB LEDs
* Derby effect x2: 3 x 3W RGB LEDs
* Strobe effect: 4 x 1W white LEDs
* Laser effect: green 30mW / 532nm and red 100mW / 650nm
- Class 3B laser with security key and interlock connector
- Modes: Auto, Musical, Master/Slave and DMX
- Number of DMX channels: 3, 5, 9 or 27
- DMX input/output: XLR 3-pin
- Display: digital screen with 4 control buttons
- Chassis: steel and plastic
- Supply voltage: 100-240V 50/60 Hz
- Power consumption: 45W
- Weight: 6.6kg
- Protection rating: IP20 (indoor use)
- Inluded : power cable and Velcro fastener, tripod, IR remote control, carrying case
- Tripod: height-adjustable from 1.5m to 2.5m
Kompakt og lav profil
Bi-amp eller full range
Pole socket
Robust Duraflex kabinet
Specifikationer
Nominel impedanse 8 ohm
Følsomhed 95 dB 1W/1m
Dimensioner (HxBxD) 571 mm x 355 mm x 264 mm
Max Peak SPL 130 dB SPL Peak
Frekvensområde 50 Hz-20 kHz
Frequency Response 75 Hz-20 kHz
Spredning 70˚ × 70˚ nominal
Effekt 800 W / 1600 W / 3200 W (Continuous/Program/Peak)
Input Connectors Two NL4
Vægt 19 kg
VORTEX 315
Vortex 315, designed by Silvio della Mattia and Viscount, is the ultimate rotary speaker built specifically for organs using high quality materials and components. The most reliable sound in a lightweight rotary speaker.
Type 2 amplified channels (woofer with rotating drum + driver with rotating horn)
Power (W) 300W Upper 80W and Lower 220W
Crossover Frequency 800Hz
Subsonic filter Yes
HF Protection compressor, short circuit, thermal
PC Control Yes
Connections 3 pins IEC 250 VAC, 2x balanced input jacks, jack pedal, USB B TYpe, MIDI IN, UNDECAL 11 pin connector
Controls Volume, Equalizer (bass - mid gain - mid frequency - treble), 11 pin input sensitivity, FACTORY RESET, rotative presets selector
Engine Controls The led is: off when the motors are brake; yellow when the motors are slow; red when the motors are fast.
You can brake (independently from the horn) the rotor bass by it’s switch. .......
SEE INFO
Price € 2890,00
MERISH 5+ Plus: The live machine
Includes all the functions of Merish5 but with doubled speed and the possibility to edit audio files with separate tracks with MTA files (the format designed by M-live). It reads and plays files with extension .wav / .aac / .ogg / .flac / .aif / .au, also with the included Plug in Prompter which allows to be connected with such devices as tablet or smartphone to view lyrics and chords of the played songs in a remote way from more points on the stage.
XVIVE pedals are meticulously designed by our USA Team to bring guitar and bass players professional quality pedals with an original tone at a competitive price. The XVIVE range of pedals continues to grow as we endeavour to bring you more and more exciting yet practical products. We also make our own pedal boards, power supplies, cables and patch leads to cater for all your gigging requirements.
Discover the XVIVE difference!
The USA Design Team
The XVIVE Audio USA Design Team is made up of musicians and engineers who have decades of professional experience.
Howard Davis works as our Chief Designer. He is well known for his many pedal designs for Electro Harmonix (1976 to 1981) and later did design work for Pigtronix (including the Mother Ship analog guitar Synthesizer). He has done independent design work for several artists and we are very happy to have him aboard.
Darius Mostowfi has been a DSP and analog expert.......
Made famous by the Gretch White Falcon, this stunning guitar with abalone inlay and gold effect hardware is second to none. Comes with dual filtertrons, licensed Bigsby and gold effect hardware! 648mm scaling. Maple neck and rosewood fingerboard and bridge finish the guitar of nicely.
System Type 2-way bass reflex speaker
Max SPL (@1m) 131 dB
Frequency Response (-10 dB) 51 Hz - 20 kHz
HF 1.75" driver
LF 12” - 3” V.C
Dispersion (HxV) 90° x 40°
Crossover Frequency 1500 Hz
Peak Power 1200 W
Cooling Passive radiator
DSP 28/56 bit
Advanced Functions FIR Filters
Connectors I/O CH1: Combo, CH2: XLR-F + 6.35 mm jack (1/4”), LINE OUT: XLR-M
Controls Channel level, MAIN level, PRESET, Channel 1 sensitivity, LINK/MIX output
Cabinet Multilayer wood with polyurea finish
Dimensions (W x H x D) 359 x 610 x 350 mm (14.2" x 24" x 13.8")
Weight 21 Kg (46.3 lbs)
Finally, a professional string dampener / muting accessory that every studio, session player, and tapping aficionado should have! Slide on a FretWrap to effectively cut overtones and sympathetic resonance during recording, live performance
, two-hand tapping, or any creative situation where you need that extra muting hand for cleaner takes without the unwanted string noise or ringing. The adjustable strap lets you fine-tune the pressure and dampening of the strings
. Quickly slides over the headstock when not in use. No special guitar modification, installation, or tools required - Yet amazingly effective!
SM - Fits 4-string basses, 6-string electric and acoustic guitars, and ukeleles
MD - Fits 5-string basses & 6-string classical guitars
LG - Fits 6-string basses & 7- to 8-string guitars
XL - Fits 8- to 12-string basses, Chapman Sticks, double basses & other extended range guitars
System Type Vented stereo sub
Max SPL (@1m) 130 dB
Frequency Response (-10 dB) 45 Hz - Cut freq
LF 15” - 4” V.C
Peak Power 1000 W
Cooling Passive radiator
DSP 28/56 bit
Connectors I/O CH1/CH2: Combo, LINE OUT: XRL-M (LINK+XOVER)
Controls LEVEL, XOVER selection, POLARITY selection
Cabinet Multilayer wood with polyurea finish
Dimensions (W x H x D) 430 x 580 x 590 mm (16.9" x 22.8" x 23.2")
Weight 31.9 kg (70.32 lbs)
V Collection X følger med ved køb af AstroLab 61 eller 88!
Mellem 18. november 2025 og 5. januar 2026 er V Collection X inkluderet for alle AstroLab 61 eller 88, der er registreret på Arturias hjemmeside* (værdi ca. €599).
V Collection X er en palet af 39 softwareinstrumenter – skræddersyet til at passe til de forskellige musikalske stilarter og produktionsflow hos alle kunstnere og musikere.
V Collection X giver AstroLab-brugere mulighed for at dykke dybt ned i lyddesign og skabe deres egne tilpassede lyde – alt sammen fuldt spilbare på AstroLab.
Med sin kraftfulde software er AstroLab den perfekte løsning for musikere, der ønsker at medbringe Arturias softwarelyd til scenen.
*Software er tilgængelig i kampagneperioden efter registrering af AstroLab 61 eller 88 på arturia.com
The V3.12A it’s the ideal solution for high quality installations in churches and auditoriums. Compact and lightweight, this new self-powered speaker features two Class D amplifiers and state-of-the art electroacoustic components able to deliver outstanding sound quality, great sound pressure and incredible linearity. Expressly developed for the use with Classical organs, the V3.12A offers an on-board professional equalizer, a remote power switch feature and an innovative power saving mode.
Power
280 Watt Continuous Power
Distortion (THD)
< 0,05% up to 75 Watt rms / 4 Ohms @ 6.67 KHz
Input Impedance
15 KOhm (balanced)
Input Sensitivity
0 dB (0,775 V)
Max SPL 118 dB (Free space)
Frequency response 38-18000 Hz (+/- 3 dB)
Crossover Frequency 800 Hz @ 24 dB / oct. active - 2800 Hz @ 18 dB / oct. passive
Speakers 1 Woofer (12”) - 1 Mid Range (8”) - 1 Tweeter
System Type 2-way bass reflex speaker
Max SPL (@1m) 127 dB
Frequency Response (-10 dB) 61 Hz - 20 kHz
HF 1.35" driver
LF 10” - 2” V.C
Dispersion (HxV) 90° x 70°
Crossover Frequency 1780 Hz
Peak Power 400 W
Cooling Fan
DSP 28/56 bit
Advanced Functions FIR Filters
Connectors I/O CH1: Combo, CH2: XLR-F + 6.35 mm jack (1/4”), LINE OUT: XLR-M
Controls Channel level, MAIN level, PRESET, Channel 1 sensitivity, LINK/MIX output
Cabinet Multilayer wood with polyurea finish
Dimensions (W x H x D) 304 x 505 x 305 mm (11.9" x 19.9" x 12")
Weight 12.7 kg (28 lbs)
This guitar has been the choice of pro musicians of all genres. The versatility of this guitar begins with its solid cedar top that can play sweet mellow passages or power chords with equal ability. The maple back and sides are a perfect reflector for the tone generated by the soundboard and the gloss black finish looks great under the stage lights. The mahogany neck is joined to the body with a traditional, ultra strong dovetail joint.
Includes Takamine’s CT4B II preamp system paired with the unique Palathetic™ under-saddle pickup for peerless amplified response. The highly acclaimed CT4B II preamp system with three-band EQ, volume control and built-in tuner.
1-EFFEKT PEDALER
-t.jpg)
-t.jpg)
