Electric Bass
Body: Alder
Maple neck
Pau Ferro fretboard
Matte neck finish
20 Frets
Nut width: 41.3 mm
Scale: 864 mm
Pickups: New Player AlNiCo V Precision Split single coil
Volume knob and tone knob
Standard open gear machine heads
Ex-factory stringing: Fender 7250M .045 - .105
Colour: 3-Tone sunburst
The Pickport Studio is a specialized pick holder for all acoustic, electric and bass guitars. The Pickport Studio has been designed to mount to strap buttons, volume knobs, tone knobs, machine heads, pick guards and even Stratocaster jack plates. The Pickport is sturdy, flexible, decorative and can easily mount on your ax for as long as you wish.
Med kompressor, EQ, delay, ekko, rumklang og mere
Signalprocessor til lo-fi, forvrængning, radio, ringmodulering og andre ekstraordinære effekter
Pitch korrektion
Vokalharmoni og stemmefordobler
Farve LCD og 3 knapper muliggør intuitiv betjening
Samme følelse af de originale tonehjul i orgelens pedal . Den er bare kortere og lettere. Der er kun 18 noter. Perfekt til giggins musikere. Volume pedal medfølger.
1 strømforsyning er inkluderet. Men hvis du spiller det med en Legend eller en Legend Live, behøver du ikke det, pedalboardet er drevet via midi-kabel.
Pedalboard 18 er en MIDI pedalboard, du kan bruge den med andre mærker, med MIDI instrumenter.
Active speaker
Loudspeakers: 12"/1"
Digital power amplifier
Power: 1200 W peak, 600 W RMS
Peak SPL: 129 dB
Asymmetrical horn tweeter 100° x85°
XLR and 6.3 jack input
56-Bit DSP
8 Sound presets for the monitor and stand application
2 Separately adjustable inputs with mix output
Multifunctional housing incl. slanted monitor angle
3x M10 rigging points
Dimensions: 350 x 642 x 349 mm
Weight: 14.3 kg
Finally, a professional string dampener / muting accessory that every studio, session player, and tapping aficionado should have! Slide on a FretWrap to effectively cut overtones and sympathetic resonance during recording, live performance, two-hand tapping, or any creative situation where you need that extra muting hand for cleaner takes without the unwanted string noise or ringing. The adjustable strap lets you fine-tune the pressure and dampening of the strings. Quickly slides over the headstock when not in use. No special guitar modification, installation, or tools required - Yet amazingly effective!
SM - Fits 4-string basses, 6-string electric and acoustic guitars, and ukeleles
MD - Fits 5-string basses & 6-string classical guitars
LG - Fits 6-string basses & 7- to 8-string guitars
XL - Fits 8- to 12-string basses, Chapman Sticks, double basses & other extended range guitars
Tenore Ukulele bag
15 mm padding
Made of rip-proof technical “gridding cloth” nylon with cloth outer border
Black color with orange finishings
Velcro reinforced easy-to-open handle
Adjustable double strap
Large frontal pocket
Strong zippers stitched with anti-rip nylon
For stage applications
Linear frequency response
Excellent feedback resistance
Polar pattern: Cardioid
Frequency range: 20 - 20,000 Hz
Sensitivity: 5.6 mV/Pa
Peak SPL: 150 dB
Impedance: 200 Ohm
Current consumption: 4 mA
Requires 48 V phantom power
Black metal housingDouble bearing capsule suspension
Dimensions: 185 x 51 mm
Weight: 312 g
SA61 microphone holder and bag included
Legend Live orgel, der perfekt kan genskabe lyden af tonehjul orgler. Det tilbyder dig igen den "vintage følelse". Med fire sæt drawbars og dobbelt tastaturer, står dette orgel noget for sig selv i det avancerede teknologiske lyde og sansen af den gamle klang. Hvert aspekt af et tonehjul tastatur og lyd er så perfekt dupliceret, at spillere over hele verden siger: "Det er det bedste nogensinde”!
SMF500 LIGHT
Galli® Strings - With their warm and extremely dynamic sound, impeccable intonation and great elasticity to the touch, the SUPREMA MANDOLIN STRINGS by Gallistrings allow the mandolinist to play with excellent musical phrasing, wide expressiveness and skillful agility.
Thanks to their softness, they are particularly suitable for the mandolins of the great lutherie of the past.
CAT. N. NOTE DESCRIPTION INCH MM LBS KG
SMF5001 MI / E Plain Steel - Loop End .0095 0,24 14,2 7,1
SMF5002 LA / A Flat Wound .0135 0,35 15,1 6,9
SMF5003 RE / D Flat Wound .021 0,52 14,5 6,6
SMF5004 SOL / G Flat Wound .031 0,78 13,4 6,1
Mikrofon kabel 6,0 meter XLR - XLR
99% pure Oxigen Free Copper (OFC), totally noiseless thanks to an internal semi-conductive PVC jacket
Audio signal cable with spiral > 94% coverage shield
Low capacitance: 85 pF/m It grants a clean and bright sound that is accurate to its source and high mechanical strenght while having a soft cable
Extremely sturdy: PVC and vulcanised silicone external coating for a maximum flexibility and a long durability
Resin injection to protect internal connections for an eternal duration
Vanguard catchy design
Hybrid connectors: mix between die-cast plastic body and chrome metal body for an exceptional robustness
TYPE 5 String G Banjo
TUNING G, D, G, B, D
BRACKETS 18
RESONATOR Maple
SIDES Maple
FINGERBOARD Techwood
BRIDGE Maple with Ebony tip
HEAD Remo Ivory
FINISH Natural Gloss
Concerto Ukulele bag
15 mm padding
Made of rip-proof technical “gridding cloth” nylon with cloth outer border
Black color with orange finishings
Velcro reinforced easy-to-open handle
Adjustable double strap
Large frontal pocket
Strong zippers stitched with anti-rip nylon
99% pure Oxigen Free Copper (OFC), totally noiseless thanks to an internal semi-conductive PVC jacket
Audio signal cable with spiral > 94% coverage shield
Low capacitance: 85 pF/m It grants a clean and bright sound that is accurate to its source and high mechanical strenght while having a soft cable
Extremely sturdy: PVC and vulcanised silicone external coating for a maximum flexibility and a long durability
Resin injection to protect internal connections for an eternal duration
Vanguard catchy design
Hybrid connectors: mix between die-cast plastic body and chrome metal body for an exceptional robustness
2 MUDHONEYS IN 1 - DUAL DISTORTION
If you still haven’t heard a T-Rex Mudhoney, do yourself a favour and plug one in next time you’re at the music store.
Dirty and sweet, this classic dual distortion pedal has been praised for its amazing tonal range and ability to deliver everything from a smooth dirty edge to a harrowing wall of distorted sound. It’s one of first pedals we produced, and it set the standard for many T-Rex pedals to come.
Everything that is great about the original Mudhoney – and then doubles it! With two channels of vintage gain, you can easily switch between a clean sound from your amp, a nice edgy overdrive from the one Mudhoney channel and a thick warm distortion from the other channel – delivering deliciously dirty T-Rex tone all the way.
System Type 2-way bass reflex speaker
Max SPL (@1m) 127 dB
Frequency Response (-10 dB) 61 Hz - 20 kHz
HF 1.35" driver
LF 10” - 2” V.C
Dispersion (HxV) 90° x 70°
Crossover Frequency 1780 Hz
Peak Power 400 W
Cooling Fan
DSP 28/56 bit
Advanced Functions FIR Filters
Connectors I/O CH1: Combo, CH2: XLR-F + 6.35 mm jack (1/4”), LINE OUT: XLR-M
Controls Channel level, MAIN level, PRESET, Channel 1 sensitivity, LINK/MIX output
Cabinet Multilayer wood with polyurea finish
Dimensions (W x H x D) 304 x 505 x 305 mm (11.9" x 19.9" x 12")
Weight 12.7 kg (28 lbs)
It’s not easy to reinvent forgotten technology, but after many years of research, we found the lost secrets and brought back the authentic echoes from the 1950s. It’s known for its use in David Gilmour and Hank Marvin’s guitar tones, John Bonham even used it on drums!
The Binson Echorec provides a unique and distinguishing type of echo supplied by a rotating metal drum where the audio signal is recorded through a magnetic recording head. The Four Playback heads will allow you to choose individual echoes and swells.
BINSON ECHOREC REBORN BY T-REX EFFECTS DENMARK
GM9882HP – Double handheld + headset UHF wireless microphone
Double handheld + headset UHF wireless microphone system with convenient ABS case for carriage 200 channels available (100+100) and Auto Scan system of free available frequencies. Infrared rays transmission towards the transmitter for a quick setting Frontal volume setting independent for each channel, two XLR outputs and one MIX Ø 6,3 mm jack output. Control LED for radio and audio frequency. External power supply included. Rack mount adapters included (1/2 rack).
Finally, a professional string dampener / muting accessory that every studio, session player, and tapping aficionado should have! Slide on a FretWrap to effectively cut overtones and sympathetic resonance during recording, live performance
, two-hand tapping, or any creative situation where you need that extra muting hand for cleaner takes without the unwanted string noise or ringing. The adjustable strap lets you fine-tune the pressure and dampening of the strings
. Quickly slides over the headstock when not in use. No special guitar modification, installation, or tools required - Yet amazingly effective!
SM - Fits 4-string basses, 6-string electric and acoustic guitars, and ukeleles
MD - Fits 5-string basses & 6-string classical guitars
LG - Fits 6-string basses & 7- to 8-string guitars
XL - Fits 8- to 12-string basses, Chapman Sticks, double basses & other extended range guitars
Transporttaske og vogn
Til Viscount Legend Live og Legend Soul 261 orgel
Med forstærkede kanter og indvendig polstring
Håndtag
To rummelige sidelommer
Indvendige mål (B x H x D): 101 x 59 x 20 cm
Udvendige mål (B x H x D): 114 x 65 x 26 cm
Vægt: 10,3 kg
‘The British Sound’
Formidable weaponry
It was the Who’s John Entwistle who first traded in his Marshall stacks in favour of Sound City at the beginning of 1967, and Pete Townshend followed later that year.
At this time, Dave Reeves was providing Sound City with the amplifiers, OEM. They were the first in a lineage of amplifiers that would quickly evolve into Hiwatt.
Also, around this time, Jimi Hendrix and his manager Chas Chandler approached Townshend, asking for his opinion on amplification. He told them that he had stopped using Marshall, as he thought Sound City were better. The Jimi Hendrix Experience subsequentlystarted using Sound City rigs, but set them up together with their Marshall stacks instead of replacing them.
In late 1968, The Who approached Dallas Arbiter, the makers of Sound City, asking if their equipment could be modified slightly. This request was denied, but independent amp designer and manufacturer Dave Reeves agreed, and created customised L100 amplifier
T-REX CREAMER REVERB
CREAMER - MAJOR REVERB
So, you finally got your rig dialed in and it sounds fantastic, but sometimes you feel like adding a bit of depth or airy-ness to it. You want to fill in the holes in your playing, add some ambience or you maybe just really like those dreamy, special sounds that seem to take on a life of their own.
HOWEVER, you don´t want to be lost in sub-menus or unfamiliar parameters, your pedal board is pretty much packed with all your precious goodies and you don´t want to ruin that tone you finally nailed.
We have designed the Creamer reverb to be dead simple to operate, but with just enough room for tweaking, so you don´t feel limited in your search for the sonic equivalent of Grand Canyon or that small room we frequently visit every day.
SPIN-TONE 700
The Spin-Tone amplifiers incorporate an hybrid system with a rotating horn in the upper part and powerful woofers in the lower; a unique Rotary speakers line dedicated to the organist’s needs!
Type 3 ways 3 amplifiers (2 speakers with woofer and tweeter for rotary effect or stationary + rotating driver)
Power (W) Lower 300W + 300W (L+R) - Upper 150W
Max SPL calculated (dB) 127
Crossover Frequency 1.2 Khz
Subsonic filter Yes
HF Protection compressor, short circuit, thermal
PC Control Yes
Connections 3 pins IEC 250 VAC, 2x balanced input jacks, jack pedal, USB B TYpe, MIDI IN, UNDECAL 11 pin connector
Controls Pedal input gain, Volume, Equalizer (bass - mid gain - mid frequency - treble), 11 pin input sensitivity, FACTORY RESET, rotative presets selector
Speakers 2x10" Woofer, PA Driver with rotating horn
Cabinet Plywood ...........m.m. Se Info
T-REX REPLICA - DELAY
THE ORIGINAL COLLECTION
T-Rex Effects is proud to announce that the legendary Replica Delay is back with an even larger and more powerful “engine”, but still delivers the same iconic sound and simplicity.
The Replica is built with high-quality European components and Danish craftsmanship; we are happy to say that we have achieved a new level.
You will discover two different modes, ¨Vintage mode¨, where the repeats are passed through a compressor/expander circuit, which makes the sound smooth and dynamic.
This circuit was used in the first generation of the Replica.