Features
600 W RMS CLASS-D AMPLIFIER
STEREO BALANCED INPUT
LINK OR X-OVER BALANCED STEREO OUTPUT MODE
COMPACT AND STURDY WOOD CABINET
LIGHTWEIGHT
POLARITY INVERSION SWITCH
FLAT OR BOOST EQ MODE SWITCH
Technical Data
Speaker Type: Active Subwoofer
Acoustical data
Frequency Response [-10dB]: 46 – 123 Hz
Max SPL (1 m): 129 dB
Directivity: omnidirectional
LF: 12”
LF Voice Coil: 2.5″
Amplifier
Amp Technology: SMSP digital amplifier
Amp Class: Class D
RMS Power: 600 W
Peak Power: 1200 W
Processor
Controller: DSP 28/56 Bit
Limiter: Peak, Thermal, RMS
Controls:
1x Subwoofer attenuation Control
1x Flat/Boosted switch
1x Switch output mode
1x Polarity switch
Input
Signal Input: 2x XLR (balanced)
Signal Output: 2x XLR (balanced)
Mechanics
Housing: Black painted Plywood
Handles: 1 on top
Pole Mount: M20
Width: 360 mm (14.72 in)
Height: 550 mm (21.65 in)
Depth: 525 mm (20.67 in)
Weight: 19.8 Kg (43.65 lbs)
GM9882 – Double handheld UHF wireless microphone
Double handheld UHF wireless microphone system with convenient ABS case for carriage. 200 channels available (100+100) and Auto Scan system of free available frequencies. Infrared rays transmission towards the transmitter for a quick setting. Frontal volume setting independent for each channel, two XLR outputs and one MIX Ø 6,3 mm jack output. Control LED for radio and audio frequency. External power supply included. Rack mount adapters included (1/2 rack).
NYHED!
FLORIDA BAR II light stand RGB LED and FX projectors set
4-in-1 floor-standing LED spotlights
BESKRIVELSE SPECIFIKATION
- Light sources :
* PAR effect x2: 3 x 9W RGB LEDs
* Derby effect x2: 3 x 3W RGB LEDs
* Strobe effect: 4 x 1W white LEDs
* Laser effect: green 30mW / 532nm and red 100mW / 650nm
- Class 3B laser with security key and interlock connector
- Modes: Auto, Musical, Master/Slave and DMX
- Number of DMX channels: 3, 5, 9 or 27
- DMX input/output: XLR 3-pin
- Display: digital screen with 4 control buttons
- Chassis: steel and plastic
- Supply voltage: 100-240V 50/60 Hz
- Power consumption: 45W
- Weight: 6.6kg
- Protection rating: IP20 (indoor use)
- Inluded : power cable and Velcro fastener, tripod, IR remote control, carrying case
- Tripod: height-adjustable from 1.5m to 2.5m
Legend
Legend Live orgel, der perfekt kan genskabe lyden af tonehjul orgler. Det tilbyder dig igen den "vintage følelse". Med fire sæt drawbars og dobbelt tastaturer, står dette orgel noget for sig selv i det avancerede teknologiske lyde og sansen af den gamle klang. Hvert aspekt af et tonehjul tastatur og lyd er så perfekt dupliceret, at spillere over hele verden siger: "Det er det bedste nogensinde”!
System Type Vented stereo sub
Max SPL (@1m) 131.5 dB
Frequency Response (-10 dB) 41 Hz - Cut freq
LF 18” - 4” V.C
Peak Power 1000 W
Cooling Passive radiator
DSP 28/56 bit
Connectors I/O CH1/CH2: Combo, LINE OUT: XRL-M (LINK+XOVER)
Controls LEVEL, XOVER selection, POLARITY selection
Cabinet Multilayer wood with polyurea finish
Dimensions (W x H x D) 510 x 650 x 690 mm (20" x 25.6" x 27.2")
Weight 38 kg (83.8 lbs)
PX1
PX1 is a multifunctional foldable music stand. Thanks to its particular design, the product is stable in any position of its use. The board can be removed and folded. This part is made of shock-resistant but flexible ABS, so that to avoid damages due to accidental falls. PX1 Music Stand is equipped with a storage compartment and two retractable holders to hang headphone and violin, cello or double bass bow. Useful also for any other proper use. In case of large music sheets, board extensions named PX1A are available as separate and optional accessories. The extensions are to be connected on the board lateral rails.
Inc. Bag
LEGEND SOUL ORGANS
Legend Soul line is born thanks to the Viscount centennial experience in projecting and making instruments. Our purpose was creating new digital tonewheels organs able to reproduce the original and iconic 9 contacts effect as much realistic as possible. After several studies, our engineers have managed to perfectly recreate all of them, using a unique technology patented by us. Thanks to that, when you play one of our Legend Soul, you will feel the iconic and realistic sounds of original tonewheels organ, but with all the advantages of the digital ones.
Madrigal Guitars in collaboration with Alfredo Gonzalez Luthier offers to the professional guitarists these 100% Handmade classical guitars concert models .
Each guitar is made separately with an exhaustive selection of exclusive and exotics woods and highly musical especiality.
The playing guitarist will achive Powerful attack, unique lyrical and sensitive timbre, with a wide spectrum sound between piano and forte that the professional musician will appreciate.
All the guitars are shellac finished.
IBIZA - PROFESSIONAL
Top: Solid Spruce
Neck:Cedar reinforce
Back & Sides: Solid Jacaranda
Fingerboard:Ebony
Bridge: Indian Rosewood
Frets: 21
Finish: French Laque
Inc exelent.Case
The world first heard the instantly recognizable sounds of the Mellotron on hits from the Moody Blues (“Nights in White Satin”) and the Beatles (“Strawberry Fields Forever”) in the 1960s. In 2010, Mellotron reintroduced the iconic tape-based machine in a compact digital version, the Mellotron M4000D, that retains the authentic sound, look and feel of the original keyboard while adding some significant improvements.
1200 W PEAK POWER
600 W RMS POWER
NEWLY DESIGNED ASYMMETRICAL HORN
ADVANCED DSP WITH FIR FILTERS
2 INPUT CHANNELS (MIC-LINE/MIC-INSTR)
SELECTABLE OUTPUT CHANNEL (LINK CH1/MIX CH 1+2)
8 EQ PRESETS
FRESH FULL GRILLE DESIGN
STAGE MONITOR USE
Technical Data
Speaker Type: 2-Way Active Speaker
Acoustical data
Frequency Response [-10dB]: 58 – 20.000 Hz
Frequency Response [- 3dB]: 70 – 19.600 Hz
Max SPL: 128 dB
HF: 1″ Exit, 1.4 v.c.
Type HF: Compression driver
Horizontal Directivity: 100° (85° up/120° down)
Vertical Directivity: 85° (+ 25°/-60°)
Horn: Asymmetrical Horn
LF: 10″, 2″ v.c.
Revolutionary Sound Engine
At the core of the Legend One series is the Legend Soul Engine, powered by Viscount's proprietary TMT (Tonewheel Modeling Technology) and HDS (High-Definition Sampling). These technologies provide authentic organ tones, including detailed recreations of iconic models such as the B3 (1938), C3 (1955), A100 (1961), and more. The 91 tonewheels offer rich polyphony and realistic harmonic detail, capturing the essence of classic tonewheel organs.See more Info
Electric Bass
Body: Alder
Maple neck
Pau Ferro fretboard
Matte neck finish
20 Frets
Nut width: 41.3 mm
Scale: 864 mm
Pickups: New Player AlNiCo V Precision Split single coil
Volume knob and tone knob
Standard open gear machine heads
Ex-factory stringing: Fender 7250M .045 - .105
Colour: 3-Tone sunburst
Den nye Viscount Legend Live Orgel af KeyB, giver dig den nemmeste transportabel løsning.
To Waterfall Keyboards med high trigger points, for ultra hurtig respons. Legend Live anvender det nyeste modeleringteknologi i tonehjul.
Nem at afspille
Ny designet ”leslie” og forstærker simulator.
To fulde sæt af Drawbars pr. keyboard.
Forbedret Percussion og key click. (Soft/normal volume).
Effekter: Vibrato/Chorus og Reverb
Hurtig live justering, nemme at betjene.
Ekstern 11 pins Leslie® udgang.
FX send/return
Der er en USB udgang til nodelampe, iPad opladning m.m.
Den nye Viscount Legend Live Orgel af KeyB, giver dig den nemmeste transportabel løsning.
To Waterfall Keyboards med high trigger points, for ultra hurtig respons. Legend Live anvender det nyeste modeleringteknologi i tonehjul.
Nem at afspille
Ny designet ”leslie” og forstærker simulator.
To fulde sæt af Drawbars pr. keyboard.
Forbedret Percussion og key click. (Soft/normal volume).
Effekter: Vibrato/Chorus og Reverb
Hurtig live justering, nemme at betjene.
Ekstern 11 pins Leslie® udgang.
FX send/return
Der er en USB udgang til nodelampe, iPad opladning m.m.
Active high-performance column PA system
1" Compression driver with CD horn
6x 3" Centre speaker
10" Long excursion sub-woofer
Power: 2000 Watt
Class D power amplifier
Maximum level: 126 dB Peak
Frequency response +/- 10 dB: 38 - 20,000 Hz
Horn characteristic: 120° x 30°
24-Bit DSP with storable 5 User Presets: Mode, Master EQ,Delay, Display, Bluetooth
Modes: 3 Basic settings for Music, Voice and DJ
System delay adjustable
Illuminated LC display
4 Channel mixer
2 Switchable mic/line inputs: XLR/jack combo
1 HiZ instrument input
1 RCA stereo input
1 XLR mix output
Bluetooth 5.0 for audio streaming
Variable column construction with or without spacer element
Sub-woofer cabinet made of birch/multiplex wood
Bass dimensions (W x H x D): 36.6 x 62.5 x 54.1 cm
Bass weight: 21 kg
Dimensions of top/spacer (W x H x D): 10.8 x 82.5 x 9.8 cm
Weight of top: 3.9 kg
Weight of spacer: 2 kg
Total height: 2.13 m
Total weight 26.9 kg
SPIN-TONE 400
Spin-Tone 400 is our 3-way amplifier equipped with 2 speakers with woofer and tweeter for rotary or stationary effect and a rotating driver, specifically designed to reproduce the original rotary horn amplifiers. The Spin-Tone 400 (400W), with its 23,5 kg, is the most portable solution for gigs and the perfect amp to connect to your Legend Soul, or any other instrument of our line and not, bringing that vintage touch that will make the difference.
Se Info
SPIN-TONE 700
The Spin-Tone amplifiers incorporate an hybrid system with a rotating horn in the upper part and powerful woofers in the lower; a unique Rotary speakers line dedicated to the organist’s needs!
Type 3 ways 3 amplifiers (2 speakers with woofer and tweeter for rotary effect or stationary + rotating driver)
Power (W) Lower 300W + 300W (L+R) - Upper 150W
Max SPL calculated (dB) 127
Crossover Frequency 1.2 Khz
Subsonic filter Yes
HF Protection compressor, short circuit, thermal
PC Control Yes
Connections 3 pins IEC 250 VAC, 2x balanced input jacks, jack pedal, USB B TYpe, MIDI IN, UNDECAL 11 pin connector
Controls Pedal input gain, Volume, Equalizer (bass - mid gain - mid frequency - treble), 11 pin input sensitivity, FACTORY RESET, rotative presets selector
Speakers 2x10" Woofer, PA Driver with rotating horn
Cabinet Plywood ...........m.m. Se Info
System Type 2-way bass reflex speaker
Max SPL (@1m) 131 dB
Frequency Response (-10 dB) 51 Hz - 20 kHz
HF 1.75" driver
LF 12” - 3” V.C
Dispersion (HxV) 90° x 40°
Crossover Frequency 1500 Hz
Peak Power 1200 W
Cooling Passive radiator
DSP 28/56 bit
Advanced Functions FIR Filters
Connectors I/O CH1: Combo, CH2: XLR-F + 6.35 mm jack (1/4”), LINE OUT: XLR-M
Controls Channel level, MAIN level, PRESET, Channel 1 sensitivity, LINK/MIX output
Cabinet Multilayer wood with polyurea finish
Dimensions (W x H x D) 359 x 610 x 350 mm (14.2" x 24" x 13.8")
Weight 21 Kg (46.3 lbs)
Extensible arm microphone stand. Adjustable elevation arm and professional knob for the height fastening equipped with fixed desktop stand. Suggested for radio installations and dubbing studios.
Maximum Height 100 cm.
Weight1,2 Kg.
Maximum Carriage Capacity1,8 Kg.
Total Volume 0,068 cbm.
Color Black
Material of Construction steel
NAMED AFTER DANISH GUITARIST KNUD MØLLER
T-Rex Møller 2 delivers the same classic overdrive that made it's predecessor one of T-Rex’s most sought-after pedals. Named after Danish guitarist Knud Møller, for whom the original pedal was designed, Møller 2 features a more durable “Bass Boost” toggle switch and easier-to-read control knob graphics. The pedal is armed with a 0-20 db clean boost, as well as a mix control which lets you dial in the perfect balance between distorted and clean signals. Rolled all the way up and with distortion maxed, the pedal sounds just like a vintage tube amp at full volume. Roll the Mix knob back a bit, and your clean signal starts to get through; if you pick lightly or roll back your guitar volume, you get a stunning clean, softly-clipping sound that retains all the feel and dynamics of your original tone, only bigger, louder and richer. The boost function lets you dial in a solo level, whether the overdrive circuit is activated or not.
Compact speaker system for concerts and conferences
10" subwoofer with amplifiers and mixer
8 x 2" sound line with two spacers
Power: 1500 watts
Digital class-D amplifier
Maximum level: 123 dB
Beam angle: 170° x 30°
Frequency range: 37 - 20000 Hz (-10dB)
Integrated DSP
Built-in 5-channel digital mixer with 8-band EQ, AFS (advanced feedback suppression) and reverb for connecting multiple signals (microphones, instruments, CD or MP3 players)
Dbx gate and compressor per channel
Lexicon effects
3x XLR combo jacks (2x 48 V phantom power)
1x Hi-Z jack input
1x mini jack input
Bluetooth V5 audio streaming
App for iOS and Android
Controls channel 1-3: Gain, bass, mid, treble, reverb
Mic/line inputs channel 1-3: Combination jack 6.3 mm jack / XLR
Channel 4 controls: Gain, bass, mid, treble, reverb
Line input channel 4: 6.3 mm jack
Channel 5 control: Gain, bass, mid, treble, reverb
Aux-in input channel 5: 3.5 mm mini jack
See INFO
1-EFFEKT PEDALER
-t.jpg)
-t.jpg)
