SPIN-TONE 400
Spin-Tone 400 is our 3-way amplifier equipped with 2 speakers with woofer and tweeter for rotary or stationary effect and a rotating driver, specifically designed to reproduce the original rotary horn amplifiers. The Spin-Tone 400 (400W), with its 23,5 kg, is the most portable solution for gigs and the perfect amp to connect to your Legend Soul, or any other instrument of our line and not, bringing that vintage touch that will make the difference.
Se Info
System Type 2-way bass reflex speaker
Max SPL (@1m) 131 dB
Frequency Response (-10 dB) 51 Hz - 20 kHz
HF 1.75" driver
LF 12” - 3” V.C
Dispersion (HxV) 90° x 40°
Crossover Frequency 1500 Hz
Peak Power 1200 W
Cooling Passive radiator
DSP 28/56 bit
Advanced Functions FIR Filters
Connectors I/O CH1: Combo, CH2: XLR-F + 6.35 mm jack (1/4”), LINE OUT: XLR-M
Controls Channel level, MAIN level, PRESET, Channel 1 sensitivity, LINK/MIX output
Cabinet Multilayer wood with polyurea finish
Dimensions (W x H x D) 359 x 610 x 350 mm (14.2" x 24" x 13.8")
Weight 21 Kg (46.3 lbs)
Finally, a professional string dampener / muting accessory that every studio, session player, and tapping aficionado should have! Slide on a FretWrap to effectively cut overtones and sympathetic resonance during recording, live performance, two-hand tapping, or any creative situation where you need that extra muting hand for cleaner takes without the unwanted string noise or ringing. The adjustable strap lets you fine-tune the pressure and dampening of the strings. Quickly slides over the headstock when not in use. No special guitar modification, installation, or tools required - Yet amazingly effective!
SM - Fits 4-string basses, 6-string electric and acoustic guitars, and ukeleles
MD - Fits 5-string basses & 6-string classical guitars
LG - Fits 6-string basses & 7- to 8-string guitars
XL - Fits 8- to 12-string basses, Chapman Sticks, double basses & other extended range guitars
SPIN-TONE 700
The Spin-Tone amplifiers incorporate an hybrid system with a rotating horn in the upper part and powerful woofers in the lower; a unique Rotary speakers line dedicated to the organist’s needs!
Type 3 ways 3 amplifiers (2 speakers with woofer and tweeter for rotary effect or stationary + rotating driver)
Power (W) Lower 300W + 300W (L+R) - Upper 150W
Max SPL calculated (dB) 127
Crossover Frequency 1.2 Khz
Subsonic filter Yes
HF Protection compressor, short circuit, thermal
PC Control Yes
Connections 3 pins IEC 250 VAC, 2x balanced input jacks, jack pedal, USB B TYpe, MIDI IN, UNDECAL 11 pin connector
Controls Pedal input gain, Volume, Equalizer (bass - mid gain - mid frequency - treble), 11 pin input sensitivity, FACTORY RESET, rotative presets selector
Speakers 2x10" Woofer, PA Driver with rotating horn
Cabinet Plywood ...........m.m. Se Info
Legend
Legend Live orgel, der perfekt kan genskabe lyden af tonehjul orgler. Det tilbyder dig igen den "vintage følelse". Med fire sæt drawbars og dobbelt tastaturer, står dette orgel noget for sig selv i det avancerede teknologiske lyde og sansen af den gamle klang. Hvert aspekt af et tonehjul tastatur og lyd er så perfekt dupliceret, at spillere over hele verden siger: "Det er det bedste nogensinde”!
Compact speaker system for concerts and conferences
10" subwoofer with amplifiers and mixer
8 x 2" sound line with two spacers
Power: 1500 watts
Digital class-D amplifier
Maximum level: 123 dB
Beam angle: 170° x 30°
Frequency range: 37 - 20000 Hz (-10dB)
Integrated DSP
Built-in 5-channel digital mixer with 8-band EQ, AFS (advanced feedback suppression) and reverb for connecting multiple signals (microphones, instruments, CD or MP3 players)
Dbx gate and compressor per channel
Lexicon effects
3x XLR combo jacks (2x 48 V phantom power)
1x Hi-Z jack input
1x mini jack input
Bluetooth V5 audio streaming
App for iOS and Android
Controls channel 1-3: Gain, bass, mid, treble, reverb
Mic/line inputs channel 1-3: Combination jack 6.3 mm jack / XLR
Channel 4 controls: Gain, bass, mid, treble, reverb
Line input channel 4: 6.3 mm jack
Channel 5 control: Gain, bass, mid, treble, reverb
Aux-in input channel 5: 3.5 mm mini jack
See INFO
Tenore Ukulele bag
15 mm padding
Made of rip-proof technical “gridding cloth” nylon with cloth outer border
Black color with orange finishings
Velcro reinforced easy-to-open handle
Adjustable double strap
Large frontal pocket
Strong zippers stitched with anti-rip nylon
The Legend LM 73 lower manual is the perfect addition to your Legend ONE keyboard, offering a second manual dedicated to the following features:
The most compact dual manual organ with two sets of drawbars.
The removable half-moon switch on the Legend LM eases the rotary control.
If you’re feeling asymmetrical today, why not combine your Legend ONE 61 with a 73 base?
Transform your all-in-one keyboard into an all-in-one dual organ with high performance and compact dimensions and price.
40 years standing by your side
Welcome to the Bespeco world!
Established in 1981, we are an Italian Company designing, engineering, manufacturing and commercializing accessories for musical instruments.
Through constant cooperation with musicians, sound technicians and engineers we are able to build functional, sturdy and durable products, each with its own distinctive design. High quality accessories that will always come with you.
Wherever you find music, you always find an accessory: be it a cable, a guitar stand, a microphone stand, a case to protect your instrument and many more. ........
See more I (info )
We wish you a good watching!
‘The British Sound’
Formidable weaponry
It was the Who’s John Entwistle who first traded in his Marshall stacks in favour of Sound City at the beginning of 1967, and Pete Townshend followed later that year.
At this time, Dave Reeves was providing Sound City with the amplifiers, OEM. They were the first in a lineage of amplifiers that would quickly evolve into Hiwatt.
Also, around this time, Jimi Hendrix and his manager Chas Chandler approached Townshend, asking for his opinion on amplification. He told them that he had stopped using Marshall, as he thought Sound City were better. The Jimi Hendrix Experience subsequentlystarted using Sound City rigs, but set them up together with their Marshall stacks instead of replacing them.
In late 1968, The Who approached Dallas Arbiter, the makers of Sound City, asking if their equipment could be modified slightly. This request was denied, but independent amp designer and manufacturer Dave Reeves agreed, and created customised L100 amplifier
Another pick with the tri-tip design, the Axis is shaped with very rounded tips, making it a favorite for strumming styles and mandolin players. The wide body gives your fingers additional gripping surface, ensuring the pick stays in your hands even during aggressive play. Also, the identical tips frees you from worrying about the pick turning in your hands since there’s another tip waiting to take over right around the corner. These features makes the Axis a dependable pick for the soft strummer or "banger's" alike.
Hand-Shaped And Polished By Professionals To Bring You A Quality Product That Cannot Be Matched At This Price Point.
Superior Grip From A High-Grade Transparent Thermoplastic (Polymethyl Methacrylate).
Instant Tone Improvement.
Play Faster And Louder With Our Unique Material And Bevel Design.
Proprietary Beveling System To Give The Most Consistent Bevels Possible.
Lasts Much Longer Than A Regular
Features
600 W RMS CLASS-D AMPLIFIER
STEREO BALANCED INPUT
LINK OR X-OVER BALANCED STEREO OUTPUT MODE
COMPACT AND STURDY WOOD CABINET
LIGHTWEIGHT
POLARITY INVERSION SWITCH
FLAT OR BOOST EQ MODE SWITCH
Technical Data
Speaker Type: Active Subwoofer
Acoustical data
Frequency Response [-10dB]: 46 – 123 Hz
Max SPL (1 m): 129 dB
Directivity: omnidirectional
LF: 12”
LF Voice Coil: 2.5″
Amplifier
Amp Technology: SMSP digital amplifier
Amp Class: Class D
RMS Power: 600 W
Peak Power: 1200 W
Processor
Controller: DSP 28/56 Bit
Limiter: Peak, Thermal, RMS
Controls:
1x Subwoofer attenuation Control
1x Flat/Boosted switch
1x Switch output mode
1x Polarity switch
Input
Signal Input: 2x XLR (balanced)
Signal Output: 2x XLR (balanced)
Mechanics
Housing: Black painted Plywood
Handles: 1 on top
Pole Mount: M20
Width: 360 mm (14.72 in)
Height: 550 mm (21.65 in)
Depth: 525 mm (20.67 in)
Weight: 19.8 Kg (43.65 lbs)
T-REX REPLICA - DELAY
THE ORIGINAL COLLECTION
T-Rex Effects is proud to announce that the legendary Replica Delay is back with an even larger and more powerful “engine”, but still delivers the same iconic sound and simplicity.
The Replica is built with high-quality European components and Danish craftsmanship; we are happy to say that we have achieved a new level.
You will discover two different modes, ¨Vintage mode¨, where the repeats are passed through a compressor/expander circuit, which makes the sound smooth and dynamic.
This circuit was used in the first generation of the Replica.
Entertainer Keyboard
61 Semi-weighted, velocity-sensitive keys with aftertouch
464 Voices with 3 different sounds each
62 Drum kits and 580 live drums
Dual/Layer
Split
Over 400 styles
4 Nanks with unlimited registrations each
216-Voice polyphonic
7" Touch screen display
15 Sliders with LED indicator
8 Pots
Pitch bend and modulation wheel
Audio and MIDI recording
Audio player with 5+1 multitracks
2 Separate players
Effects: DSP (reverb, chorus, flanger, overdrive, distortion, tremolo, autopan, equaliser, etc.)
3-Voice vocalist for mic input 1
240 GB SSD (80 GB for system)
SD card slot (up to 512 GB)
1 GB user sample memory
Bluetooth audio input
WiFi network connection to Ketron app
Dimensions (W x D x H): 925 x 365 x 125 mm
Active Column PA System
2000 W Class D power amplifier
Max. SPL (sound pressure level): 127 dB
Frequency response: +/- 10 dB, 35 - 20,000 Hz
Horn characteristics: 120° x 30°
1" Compression driver with CD horn
6x 3" Midrange speakers
12" Bass speaker in the subwoofer
Various possibilities for setting up the column system by removing or implementing the spacer
4-Channel mixer
24-Bit DSP with 5 storable user presets (Mode, Master EQ, Delay, Display, Bluetooth)
3 Sound modes: Music, Voice, DJ
Adjustable system delay
Backlit LCD display
2 Switchable mic/line inputs: XLR/jack combo
1 Hi-Z Instrument input: Jack
1 Stereo input: RCA
1 Mix output: XLR
Bluetooth 5.0 for audio streaming
Subwoofer housing is made of birch/plywood
Bass dimensions (W x H x D): 36.6 x 67.5 x 54.1 cm
Bass weight: 22.1 kg
Top/Spacer dimensions (W x H x D): 10.8 x 82.5 x 9.8 cm
Weight of the top: 3.9 kg
Spacer weight : 2 kg
Total height: 2.18 m
Total weight: 28 kg
B108 is a versatile, portable full-range active speaker suitable for small venue applications. The bass-reflex cabinet is equipped with a 8 woofer and a 1compression driver boosted by a 400 W amp module. Its advanced DSP featuring FIR filters
Tanglewood TUB4 4 String Banjo, 18 Brackets, Remo Renaissance Head, Genuine All Mahogany with Tone Ring
UNION serien vokser støt og roligt, med nye spændende modeller. Og denne 4 strengede banjo, er et godt bud på en yderst prisrigtig banjo, i den kendte TW kvalitet. TUB4 har en krop i Mahogni og 18 stemmeskruer, samt gode Die Cast mekanikker, som tilsammen sikrer en god tone, og stabil stemning, i en fin prisklasse.
System Type 2-way bass reflex speaker
Max SPL (@1m) 125 dB
Frequency Response (-10 dB) 63 Hz - 20 kHz
HF 1.35" driver
LF 8” - 2” V.C
Dispersion (HxV) 90° x 70°
Crossover Frequency 1800 Hz
Peak Power 400 W
Cooling Fan
DSP 28/56 bit
Advanced Functions FIR Filters
Connectors I/O CH1: Combo, CH2: XLR-F + 6.35 mm jack (1/4”), LINE OUT: XLR-M
Controls Channel level, MAIN level, PRESET, Channel 1 sensitivity, LINK/MIX output
Cabinet Multilayer wood with polyurea finish
Dimensions (W x H x D) 264 x 440 x 260 mm (10.4" x 17.3" x 10.3")
Weight 10.9 kg (24 lbs)
System Type 2-way bass reflex speaker
Max SPL (@1m) 127 dB
Frequency Response (-10 dB) 61 Hz - 20 kHz
HF 1.35" driver
LF 10” - 2” V.C
Dispersion (HxV) 90° x 70°
Crossover Frequency 1780 Hz
Peak Power 400 W
Cooling Fan
DSP 28/56 bit
Advanced Functions FIR Filters
Connectors I/O CH1: Combo, CH2: XLR-F + 6.35 mm jack (1/4”), LINE OUT: XLR-M
Controls Channel level, MAIN level, PRESET, Channel 1 sensitivity, LINK/MIX output
Cabinet Multilayer wood with polyurea finish
Dimensions (W x H x D) 304 x 505 x 305 mm (11.9" x 19.9" x 12")
Weight 12.7 kg (28 lbs)
SoloStrap Neo
Perfecting the art of comfort. Twice.
The new SoloStrap Neo was designed with one thing in mind: To be the most comfortable padded single guitar strap you'll ever own! Comes in two widths: The 4.0 model (4" wide) helps ease the weight of heavier instruments such as basses and solid-body guitars, while the 2.5 model (2.5" wide) offers ample cushion for lighter instruments. Both models feature thick anti-fatigue, double-layered neoprene coupled with durable faux leather, with limited stretch to avoid that bothersome "bungee" bouncy effect.
Our easy rivet-based length adjustment system offers the widest length range, from 38" to 50", and all the way to 62" with the optional extra long tail.
1200 W PEAK POWER
600 W RMS POWER
NEWLY DESIGNED ASYMMETRICAL HORN
ADVANCED DSP WITH FIR FILTERS
2 INPUT CHANNELS (MIC-LINE/MIC-INSTR)
SELECTABLE OUTPUT CHANNEL (LINK CH1/MIX CH 1+2)
8 EQ PRESETS
FRESH FULL GRILLE DESIGN
STAGE MONITOR USE
Technical Data
Speaker Type: 2-Way Active Speaker
Acoustical data
Frequency Response [-10dB]: 58 – 20.000 Hz
Frequency Response [- 3dB]: 70 – 19.600 Hz
Max SPL: 128 dB
HF: 1″ Exit, 1.4 v.c.
Type HF: Compression driver
Horizontal Directivity: 100° (85° up/120° down)
Vertical Directivity: 85° (+ 25°/-60°)
Horn: Asymmetrical Horn
LF: 10″, 2″ v.c.
Ukulele Bass BLACK NYLON UXB810® strings are unique strings with a strong consistent sound. This synthetic core string wound with black nylon is a new revolutionary project never introduced before. It changes the way of playing the Ukulele bass, making its sound brighter and more powerful. A truly innovative string with sonority very similar to the timbre of the double bass
DIAMETER TENSION
CAT. N. NOTE DESCRIPTION INCH MM LBS KG
UXB811 G-1st Black Nylon wound on Synthetic core - - - -
UXB812 D-2nd Black Nylon wound on Synthetic core - - - -
UXB813 A-3rd Black Nylon wound on Synthetic core - - - -
UXB814 E-4th Black Nylon wound on Synthetic core - - - -
1-EFFEKT PEDALER
-t.jpg)
-t.jpg)
