GM9882H – Double headset UHF wireless microphone
Double headset UHF wireless microphone system with convenient ABS case for carriage. 200 channels available (100+100) and Auto Scan system of free available frequencies. Infrared rays transmission towards the transmitter for a quick setting. Frontal volume setting independent for each channel, two XLR outputs and one MIX Ø 6,3 mm jack output. Control LED for radio and audio frequency. External power supply included. Rack mount adapters included (1/2 rack).
Finally, a professional string dampener / muting accessory that every studio, session player, and tapping aficionado should have! Slide on a FretWrap to effectively cut overtones and sympathetic resonance during recording, live performance, two-hand tapping, or any creative situation where you need that extra muting hand for cleaner takes without the unwanted string noise or ringing. The adjustable strap lets you fine-tune the pressure and dampening of the strings. Quickly slides over the headstock when not in use. No special guitar modification, installation, or tools required - Yet amazingly effective!
SM - Fits 4-string basses, 6-string electric and acoustic guitars, and ukeleles
MD - Fits 5-string basses & 6-string classical guitars
LG - Fits 6-string basses & 7- to 8-string guitars
XL - Fits 8- to 12-string basses, Chapman Sticks, double basses & other extended range guitars
The world first heard the instantly recognizable sounds of the Mellotron on hits from the Moody Blues (“Nights in White Satin”) and the Beatles (“Strawberry Fields Forever”) in the 1960s. In 2010, Mellotron reintroduced the iconic tape-based machine in a compact digital version, the Mellotron M4000D, that retains the authentic sound, look and feel of the original keyboard while adding some significant improvements.
Electric Bass
Body: Alder
Maple neck
Pau Ferro fretboard
Matte neck finish
20 Frets
Nut width: 41.3 mm
Scale: 864 mm
Pickups: New Player AlNiCo V Precision Split single coil
Volume knob and tone knob
Standard open gear machine heads
Ex-factory stringing: Fender 7250M .045 - .105
Colour: 3-Tone sunburst
Med kompressor, EQ, delay, ekko, rumklang og mere
Signalprocessor til lo-fi, forvrængning, radio, ringmodulering og andre ekstraordinære effekter
Pitch korrektion
Vokalharmoni og stemmefordobler
Farve LCD og 3 knapper muliggør intuitiv betjening
B112 is a versatile, portable, powerful active speaker suitable for applications in medium venues. The bass-reflex cabinet is equipped with a 12 woofer and a 1.35 compression driver boosted by a 1200 W Class D amp module.
Western guitar
Thermal Top Series
Body shape: Dreadnought
Top: Solid spruce
Back & sides: Solid Indian rosewood (Dalbergia Latifolia)
Neck: Mahogany
Fretboard: Ebony
Bridge/Pins: Rosewood (Dalbergia Latifolia)
20 Frets
Scale: 644 mm (25.35")
Nut width: 45 mm (1.77")
TLD-2 preamp
Colour: Gloss, natural
Includes GC case
Active High-Performance Column PA System
6x 2.5" Midrange speakers
8" Subwoofer
Power: 300 watts RMS, 1200 watts peak
Class D power amplifier
Maximum level: 118 dB
Frequency response: 50 - 20,000 Hz
Horn pattern: 120° x 30°
2 Switchable mic/line inputs: XLR/jack combo
2 RCA inputs
1 XLR mix output
Bluetooth 5.0 for audio streaming
Bluetooth TWS Link
3-Channel mixer
2-Channel equaliser
2 Mic preamps
Undervoltage, thermal, overcurrent protection
Limiter
Dispersion angle (H x V): 120° x 45°
Plastic housing
Dimensions (W x H x D): 302 x 2029 x 390 mm
Weight subwoofer: 13 kg
Weight top: 3.2 kg
Weight spacer: 2.3 kg
Total weight: 18.5 kg
Colour: Black
99% pure Oxigen Free Copper (OFC), totally noiseless thanks to an internal semi-conductive PVC jacket
Audio signal cable with spiral > 94% coverage shield
Low capacitance: 85 pF/m It grants a clean and bright sound that is accurate to its source and high mechanical strenght while having a soft cable
Extremely sturdy: PVC and vulcanised silicone external coating for a maximum flexibility and a long durability
Resin injection to protect internal connections for an eternal duration
Vanguard catchy design
Hybrid connectors: mix between die-cast plastic body and chrome metal body for an exceptional robustness
GUITAR POLISH
D’Andrea USA’s Guitar Polish works best after a deep clean with our Lemon Oil & Conditioner. Lightly spray an even coat of polish over your guitar body and gently polish with a polishing cloth until a deep gloss appears. Keep your instruments in tip-top shape with our professional line of Guitar Care Products. Proudly Made in USA!
‘The British Sound’
Formidable weaponry
It was the Who’s John Entwistle who first traded in his Marshall stacks in favour of Sound City at the beginning of 1967, and Pete Townshend followed later that year.
At this time, Dave Reeves was providing Sound City with the amplifiers, OEM. They were the first in a lineage of amplifiers that would quickly evolve into Hiwatt.
Also, around this time, Jimi Hendrix and his manager Chas Chandler approached Townshend, asking for his opinion on amplification. He told them that he had stopped using Marshall, as he thought Sound City were better. The Jimi Hendrix Experience subsequentlystarted using Sound City rigs, but set them up together with their Marshall stacks instead of replacing them.
In late 1968, The Who approached Dallas Arbiter, the makers of Sound City, asking if their equipment could be modified slightly. This request was denied, but independent amp designer and manufacturer Dave Reeves agreed, and created customised L100 amplifier
The Mellotron Micro is the smallest version available of the M4000D Digital Mellotron, and includes many of the features of the full-size version. It includes one hundred 24-bit uncompressed sounds sourced from original first-generation Mellotron and Chamberlin tape libraries. Sound Card 01 is the built-in library for the M4000D series of instruments.
Gold-plated 1" capsule stored in miniature lyre from Rycote
Black metal housing with scratch-resistant ceramic coating
Extremely low intrinsic noise (4.5 dBA)
Polar pattern: Cardioid
Frequency range: 20 - 20000 Hz
Output impedance: 100 ohms
Sensitivity: 35.0 mV / Pa
Equivalent noise level: 4.5 dBA (according to IEC651), Max
Output level: +8.0 dBu (1 kHz, 1% THD, 1 kOhm load)
Dynamic range: 128 dB
Max. sound pressure level: 132 dB
Signal-to-noise ratio: 90 dBA (according to IEC651)
Requires 24 V / 48 V phantom power
Connection: 3-pin XLR
Dimensions (diameter x length): 50 x 190 mm
Weight: 395 g
Includes deluxe shockmount SM6 with integrated pop protection, XLR microphone cable (6 m) and dust protection bag
Made in Australia
B115 is a versatile, portable full range active speaker suitable for applications in medium to large venues. The bass-reflex cabinet is equipped with a 15 woofer and a 1.35 compression driver boosted by a 1200 W Class D amp module
System Type 2-way bass reflex speaker
Max SPL (@1m) 127 dB
Frequency Response (-10 dB) 61 Hz - 20 kHz
HF 1.35" driver
LF 10” - 2” V.C
Dispersion (HxV) 90° x 70°
Crossover Frequency 1780 Hz
Peak Power 400 W
Cooling Fan
DSP 28/56 bit
Advanced Functions FIR Filters
Connectors I/O CH1: Combo, CH2: XLR-F + 6.35 mm jack (1/4”), LINE OUT: XLR-M
Controls Channel level, MAIN level, PRESET, Channel 1 sensitivity, LINK/MIX output
Cabinet Multilayer wood with polyurea finish
Dimensions (W x H x D) 304 x 505 x 305 mm (11.9" x 19.9" x 12")
Weight 12.7 kg (28 lbs)
System Type 2-way bass reflex speaker
Max SPL (@1m) 132 dB
Frequency Response (-10 dB) 48 Hz - 20 kHz
HF 1.75" driver
LF 15” - 3” V.C
Dispersion (HxV) 90° x 40°
Crossover Frequency 1450 Hz
Peak Power 1200 W
Cooling Passive radiator
DSP 28/56 bit
Advanced Functions FIR Filters
Connectors I/O CH1: Combo, CH2: XLR-F + 6.35 mm jack (1/4”), LINE OUT: XLR-M
Controls Channel level, MAIN level, PRESET, Channel 1 sensitivity, LINK/MIX output
Cabinet Multilayer wood with polyurea finish
Dimensions (W x H x D) 427 x 705 x 428 mm (16.8" x 27.8" x 16.9")
Weight 25.9 Kg (57 lbs)
B110 is a versatile, portable, powerful active speaker suitable for small to medium venue applications. The bass-reflex cabinet is equipped with a 10 woofer and a 1.35 compression driver boosted by a 400 W amp module.
Finally, a professional string dampener / muting accessory that every studio, session player, and tapping aficionado should have! Slide on a FretWrap to effectively cut overtones and sympathetic resonance during recording, live performance, two-hand tapping, or any creative situation where you need that extra muting hand for cleaner takes without the unwanted string noise or ringing. The adjustable strap lets you fine-tune the pressure and dampening of the strings. Quickly slides over the headstock when not in use. No special guitar modification, installation, or tools required - Yet amazingly effective!
SM - Fits 4-string basses, 6-string electric and acoustic guitars, and ukeleles
MD - Fits 5-string basses & 6-string classical guitars
LG - Fits 6-string basses & 7- to 8-string guitars
XL - Fits 8- to 12-string basses, Chapman Sticks, double basses & other extended range guitars
BURNS SHADOWS BASS
Burns® London erhvervede den oprindelige Shadows bass i 2005, hvilket inspirerede os til at genudgivelse denne fantastisk bas guitar, men i en begrænset antal.
Denne bas har serie nr. 005
KS12
Professional keyboard stand made of heavy duty 30 x 30 mm steel tubing. Five opening positions by an ergonomic squeeze handle on the top tier. Four cable management hooks and levelling rubber feet.
DATA SHEET
Height
min 48 – max 98 cm
Weight
4.5 Kg
LEGEND SOUL ORGANS
Legend Soul line is born thanks to the Viscount centennial experience in projecting and making instruments. Our purpose was creating new digital tonewheels organs able to reproduce the original and iconic 9 contacts effect as much realistic as possible. After several studies, our engineers have managed to perfectly recreate all of them, using a unique technology patented by us. Thanks to that, when you play one of our Legend Soul, you will feel the iconic and realistic sounds of original tonewheels organ, but with all the advantages of the digital ones.
1-EFFEKT PEDALER
-t.jpg)
