BRIDGE PINS – BLACK
D’Andrea USA’s Replacement Bridge Pin Sets are available in black or white and includes six bridge pins along with a matching end pin. Molded from high impact plastic, they fit most acoustic guitar bridges and are easy to install.
System Type 2-way bass reflex speaker
Max SPL (@1m) 127 dB
Frequency Response (-10 dB) 61 Hz - 20 kHz
HF 1.35" driver
LF 10” - 2” V.C
Dispersion (HxV) 90° x 70°
Crossover Frequency 1780 Hz
Peak Power 400 W
Cooling Fan
DSP 28/56 bit
Advanced Functions FIR Filters
Connectors I/O CH1: Combo, CH2: XLR-F + 6.35 mm jack (1/4”), LINE OUT: XLR-M
Controls Channel level, MAIN level, PRESET, Channel 1 sensitivity, LINK/MIX output
Cabinet Multilayer wood with polyurea finish
Dimensions (W x H x D) 304 x 505 x 305 mm (11.9" x 19.9" x 12")
Weight 12.7 kg (28 lbs)
Active High-Performance Column PA System
6x 2.5" Midrange speakers
8" Subwoofer
Power: 300 watts RMS, 1200 watts peak
Class D power amplifier
Maximum level: 118 dB
Frequency response: 50 - 20,000 Hz
Horn pattern: 120° x 30°
2 Switchable mic/line inputs: XLR/jack combo
2 RCA inputs
1 XLR mix output
Bluetooth 5.0 for audio streaming
Bluetooth TWS Link
3-Channel mixer
2-Channel equaliser
2 Mic preamps
Undervoltage, thermal, overcurrent protection
Limiter
Dispersion angle (H x V): 120° x 45°
Plastic housing
Dimensions (W x H x D): 302 x 2029 x 390 mm
Weight subwoofer: 13 kg
Weight top: 3.2 kg
Weight spacer: 2.3 kg
Total weight: 18.5 kg
Colour: Black
Active Near Field Monitor
Equipment: 8" Woofer and 1" tweeter
2-Way Class-D amplifier
Power: 112 W - 56 W woofer and 56 W treble
Frequency range: 45 - 20,000 Hz (+/- 3 dB)
Max. SPL: 112 dB (peak)
Input sensitivity adjustable +4 dBu / -10 dB
Boundary EQ
HF trim switch
Connections: Line input XLR and 6.3 mm jack balanced
15 mm MDF housing
Dimensions (H x W x D): 419 x 254 x 308 mm
Weight: 8.1 kg
Price per set
For stage applications
Linear frequency response
Excellent feedback resistance
Polar pattern: Cardioid
Frequency range: 20 - 20,000 Hz
Sensitivity: 5.6 mV/Pa
Peak SPL: 150 dB
Impedance: 200 Ohm
Current consumption: 4 mA
Requires 48 V phantom power
Black metal housingDouble bearing capsule suspension
Dimensions: 185 x 51 mm
Weight: 312 g
SA61 microphone holder and bag included
The MW430 lyre is equipped with 4 powerful 30W RGBW LEDs for a rich and dense light output, allowing Wash effects through a palette of vibrant colors. Thanks to its many operating modes and its fast and silent motorization allowing a 540° pan angle and 200° tilt angle, this lyre is capable of covering large spaces with a captivating dynamic, making it a perfect projector for DJs, bars, clubs, or bands. Compact and lightweight at 3 kg, the MW430 is equipped with a base for safe upside-down installations.
T-REX REPLICA - DELAY
THE ORIGINAL COLLECTION
T-Rex Effects is proud to announce that the legendary Replica Delay is back with an even larger and more powerful “engine”, but still delivers the same iconic sound and simplicity.
The Replica is built with high-quality European components and Danish craftsmanship; we are happy to say that we have achieved a new level.
You will discover two different modes, ¨Vintage mode¨, where the repeats are passed through a compressor/expander circuit, which makes the sound smooth and dynamic.
This circuit was used in the first generation of the Replica.
88 keys
Legend '70s : ARTIST BASIC VERSION : ( SOUND MODULES: E.PIANO,SOUND COLLECTION )
The LEGEND '70s introduces the new concept of MODULAR STAGE PIANO that allows you to customize the instrument according to your needs. The superb sound quality, thanks to the unique VISCOUNT PM (Physical Modeling) technology and the accurate response of the keyboard, combined into a portable instrument of the highest quality.
BESKRIVELSE SPECIFIKATION
The PARWASH 730 QUAD developed by Algam Lighting is a must-have for any event or light show. This LED PAR is capable of generating a powerful light flow thanks to its 7 X 30W LEDs combined with 25° aperture optics, while generating rich, vibrant colors with its RGB+WW (Warm White) color palette. Ideal for a wide range of applications, the PARWASH 730 QUAD features professional connectivity with 3-point DMX input/output for precise control of the machine and chaining with another PARWASH 730 QUAD. To ensure safe operation, this Par Wash is equipped with a PowerCon locking electrical connector to prevent unintentional disconnection, plus a PowerCon output for powering another PARWASH 730 QUAD. This high-performance machine is actively cooled to guarantee optimal operating conditions, whether on the floor or hanging from a double bracket.
PN PURE NICKEL ELECTRIC, " Warm and Vintage tone" ! Pure nickel is an alternative to the brighter tone of nickel-plated.
In 50` it was the primary strings alloy. These strings provide a warm and vintage sound perfect for traditional blues,classic rock,rockabilly and more.....
System Type 2-way bass reflex speaker
Max SPL (@1m) 131 dB
Frequency Response (-10 dB) 51 Hz - 20 kHz
HF 1.75" driver
LF 12” - 3” V.C
Dispersion (HxV) 90° x 40°
Crossover Frequency 1500 Hz
Peak Power 1200 W
Cooling Passive radiator
DSP 28/56 bit
Advanced Functions FIR Filters
Connectors I/O CH1: Combo, CH2: XLR-F + 6.35 mm jack (1/4”), LINE OUT: XLR-M
Controls Channel level, MAIN level, PRESET, Channel 1 sensitivity, LINK/MIX output
Cabinet Multilayer wood with polyurea finish
Dimensions (W x H x D) 359 x 610 x 350 mm (14.2" x 24" x 13.8")
Weight 21 Kg (46.3 lbs)
Features
600 W RMS Class D AMP
Selectable Stereo Balanced Input
Link or Xover Balanced Stereo Output Mode
Compact and sturdy wood cabinet
Lightweight
Polarity Switch
FLAT or BOOST Mode Switch
Technical Data
Speaker Type: Active Subwoofer
Acoustical data
Frequency Response [-10dB]: 42 – 124 Hz
Max SPL (1 m): 131 dB
Directivity: omnidirectional
LF: 15″
LF Voice Coil: 2.5″
Amplifier
Amp Technology: SMSP digital amplifier
Amp Class: Class D
RMS Power: 600 W
Peak Power: 1200 W
Processor
Controller: 28/56 bit DSP
Limiter: Peak, Thermal, RMS
Controls: Subwoofer level, Outputs mode, Polarity, Subwoofer mode
Input
Signal Input: 2x XLR (balanced)
Signal Output: 2x XLR (balanced)
Mechanics
Housing: Plywood
Grille: Full metal grid
Pole Mount: M20
Width: 430 mm (16.92 in)
Height: 580 mm (22.83 in)
Depth: 600 mm (23.62 in)
Weight: 25.5 kg (56.22 lbs)
Legend
Legend Live orgel, der perfekt kan genskabe lyden af tonehjul orgler. Det tilbyder dig igen den "vintage følelse". Med fire sæt drawbars og dobbelt tastaturer, står dette orgel noget for sig selv i det avancerede teknologiske lyde og sansen af den gamle klang. Hvert aspekt af et tonehjul tastatur og lyd er så perfekt dupliceret, at spillere over hele verden siger: "Det er det bedste nogensinde”!
Gold-plated 1" capsule stored in miniature lyre from Rycote
Black metal housing with scratch-resistant ceramic coating
Extremely low intrinsic noise (4.5 dBA)
Polar pattern: Cardioid
Frequency range: 20 - 20000 Hz
Output impedance: 100 ohms
Sensitivity: 35.0 mV / Pa
Equivalent noise level: 4.5 dBA (according to IEC651), Max
Output level: +8.0 dBu (1 kHz, 1% THD, 1 kOhm load)
Dynamic range: 128 dB
Max. sound pressure level: 132 dB
Signal-to-noise ratio: 90 dBA (according to IEC651)
Requires 24 V / 48 V phantom power
Connection: 3-pin XLR
Dimensions (diameter x length): 50 x 190 mm
Weight: 395 g
Includes deluxe shockmount SM6 with integrated pop protection, XLR microphone cable (6 m) and dust protection bag
Made in Australia
4 ORGANS IN ONE
A portable, 61-key CLASSIC organ with programmable two manual and pedal mode for authentic organ performance, all at a budget price! The interface is extremely simple to use.
All sounds samples are in stereo, and the deeper and higher pitches are localized in the sonic spectrum to simulate a real pipe configuration. The sound quality is excellent thanks to the special dual-material cabinet (synthetic and real wood). There is a ‘split’ function and four organ styles (Baroque, Symphonic and Romantic) with independent voice volume regulation. The keyboard is made with an exclusive design which simulates the "tracker touch" of a real pipe organ.
PX1
PX1 is a multifunctional foldable music stand. Thanks to its particular design, the product is stable in any position of its use. The board can be removed and folded. This part is made of shock-resistant but flexible ABS, so that to avoid damages due to accidental falls. PX1 Music Stand is equipped with a storage compartment and two retractable holders to hang headphone and violin, cello or double bass bow. Useful also for any other proper use. In case of large music sheets, board extensions named PX1A are available as separate and optional accessories. The extensions are to be connected on the board lateral rails.
Inc. Bag
NYHED!
FLORIDA BAR II light stand RGB LED and FX projectors set
4-in-1 floor-standing LED spotlights
BESKRIVELSE SPECIFIKATION
- Light sources :
* PAR effect x2: 3 x 9W RGB LEDs
* Derby effect x2: 3 x 3W RGB LEDs
* Strobe effect: 4 x 1W white LEDs
* Laser effect: green 30mW / 532nm and red 100mW / 650nm
- Class 3B laser with security key and interlock connector
- Modes: Auto, Musical, Master/Slave and DMX
- Number of DMX channels: 3, 5, 9 or 27
- DMX input/output: XLR 3-pin
- Display: digital screen with 4 control buttons
- Chassis: steel and plastic
- Supply voltage: 100-240V 50/60 Hz
- Power consumption: 45W
- Weight: 6.6kg
- Protection rating: IP20 (indoor use)
- Inluded : power cable and Velcro fastener, tripod, IR remote control, carrying case
- Tripod: height-adjustable from 1.5m to 2.5m
SHAPE Super Folk
TOP Solid Cedar
BACK Solid Mahogany
SIDES Solid Mahogany
FINGERBOARD Rosewood
BRIDGE Rosewood
STRINGS Elixir Nanoweb 12-53
ELECTRONICS LR Baggs Stage Pro Element
FINISH Vintage Sunburst Gloss
Full Specification TW45RVSE
Den talentfulde italienske designer Pagelli har arbejdet tæt sammen med Burns® London for at skabe et unikt nyt design. Den nye Jet-Sonic® oser moderne retro chic med smukke kurver og en virkelig individuel stil. Alle komponenter og materialer, der er brugt, er af høj kvalitet. Burns® er kendt for, og vores musikere er kommet til at forvente. Lyden er virkelig ude af denne verden - vi tror, at Jet-Sonic ™ skal flyve
Finally, a professional string dampener / muting accessory that every studio, session player, and tapping aficionado should have! Slide on a FretWrap to effectively cut overtones and sympathetic resonance during recording, live performance, two-hand tapping, or any creative situation where you need that extra muting hand for cleaner takes without the unwanted string noise or ringing. The adjustable strap lets you fine-tune the pressure and dampening of the strings. Quickly slides over the headstock when not in use. No special guitar modification, installation, or tools required - Yet amazingly effective!
SM - Fits 4-string basses, 6-string electric and acoustic guitars, and ukeleles
MD - Fits 5-string basses & 6-string classical guitars
LG - Fits 6-string basses & 7- to 8-string guitars
XL - Fits 8- to 12-string basses, Chapman Sticks, double basses & other extended range guitars
KALA FLATWOUND 4-STRING SET BY GALLISTRINGS
Chrome steel wrapped around a nylon core, the U•BASS® Flatwound 4-String Set by Gallistrings enables fast and stable intonation, bringing a warmth and consistency to your U•BASS® like never before.
These high-tension U•BASS® strings offer a timbre and maneuverability akin to the double bass. Smooth to the touch, the chrome flatwound tape allows your fingers to glide around the fretboard and helps protect the neck from wear and tear—perfect for any acoustic fretted or fretless U•BASS®. Scale length cm 52 - in. 20,5"
CAT. N. NOTE DESCRIPTION INCH MM LBS KG
UXB911C G-1st Chrome Steel on Nylon core .060 1.52 - -
UXB912C D-2nd Chrome Steel on Nylon core .080 2.03 - -
UXB913C A-3rd Chrome Steel on Nylon core .100 2.54 - -
UXB914C E-4th Chrome Steel on Nylon core .130 3.30 - -
1-EFFEKT PEDALER
